INTRODUCTION IMPORTANT PRECAUTIONS
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
CONDITIONING TROUBLESHOOTING GUIDELINES & MAINTENANCE
A S S E M B LY STEP 2 |
| |
BOLT (A) | CONSOLE MAST | |
SPRING WASHER (B) | ||
| ||
FLAT WASHER (C) | CONSOLE MAST GROMMET | |
| ||
| CONSOLE WIRES | |
MAIN FRAME |
|
A)Open HARDWARE BAG FOR STEP 2.
B)Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
C)Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT WASHERS (C).
HARDWARE BAG FOR STEP 2 CONTENTS :
BOLT (A) | SPRING WASHER (B) | FLAT WASHER (C) |
20 mm | 18 mm | 20 mm |
Qty: 4 | Qty: 4 | Qty: 4 |
LIMITED WARRANTY