A S S E M B LY STEP 8 |
|
INSIDE |
|
ELBOW COVER | LOWER HANDLEBAR |
| OUTSIDE |
| ELBOW COVER |
| SCREW (L) |
LOWER LINK ARM |
|
A)Open HARDWARE BAG FOR STEP 8.
B)Attach the OUTSIDE ELBOW COVER to elbow joint using 1 SCREW (L).
C)Snap the INSIDE ELBOW COVER onto the OUTSIDE ELBOW COVER. Note the position of the snap tabs before snapping into position.
D)Repeat on other side.
HARDWARE BAG FOR STEP 8 CONTENTS :
SCREW (A) 10 mm Qty: 2
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
ELLIPTICAL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
15
LIMITED WARRANTY