Horizon Fitness CE9.2 owner manual Open hardware bag

ASSEMBLY STEP 3

CONSOLE MAST

CONSOLE CABLE

PRE-INSTALLED BOLTS

MAIN FRAME

Note: Be careful not to pinch any wires while attaching the console mast.

CRANK

PEDAL ARM

HARDWARE BAG 3 CONTENTS :

WAVY WASHER (L)	BOLT (M)	SPRING WASHER (B)	FLAT WASHER (K)
22.5 mm	20 mm	15 mm	20 mm
Qty: 2	Qty: 2	Qty: 2	Qty: 2

A	Open hardware bag 3.
B	Carefully pull the console cable through
	the console mast using the twist tie located
	inside the console mast.
C	Gently slide the console mast onto the
	main frame and attach console mast to
	main frame using pre-installed bolts.
D	Slide wavy washer (l) over crank
	followed by pedal arm as shown. Rest
	pedal arm wheel on guide rail.
E	Attach the pedal arm to the crank using 1
	flat washer (k), 1 spring washer (b)

GUIDE RAIL

WAVY WASHER (L)

FLAT WASHER (K)

SPRING WASHER (B)

and 1 bolt (M).

PEDAL ARM WHEEL

BOLT (M)

F Repeat steps D–E on the opposite side of the

elliptical.

12