TOOLS INCLUDED:
FF Screwdriver FF 8 mm
FF 13/15 mm Flat Wrench
FF 5 mm
PARTS INCLUDED:
FF 1 Stabilizer Tube
FF 1 Guide Rail Set FF 2 Pedal Arms
FF 2 Lower Handlebars
FF 2 Upper Handlebars
FF 2 Lower Link Arms With Footpads FF 1 Top Cap (2 pieces)
FF 1 Console Mast
FF 1 Console Mast Boot FF 1 Console
FF 2 Handlebar Caps FF 1 Water Bottle Holder FF 1 Rear Cover
FF 1 Audio Adapter Cable FF 1 Power Cord
FF 1 Hardware Kit
PRE ASSEMBLY
UNPACKING
Unpack the product where you will be using it. Place the elliptical carton on a level flat surface. It is recommended that you place a protective covering on your floor. Never open box when it is on its side.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such as lithium bike grease is recommended.
NEED HELP?
If you have questions or if there are any missing parts, contact Customer Tech Support. Contact information is located on the back panel of this manual.
9