Trek 11i owner manual Trek Incite 9i, Copyright Trek Bicycle Corporation 2006 All rights reserved

Page 1

TREK INCITE 9i and 11i

Bicycle Computer Owner’s Manual

	This manual explains the installa-
	tion and use of the Trek Incite 9i
	and 11i bicycle computer. Please
	read this manual carefully and
	save it for future reference.	F	MPH
	If you do not understand the

	information in this manual, or
	you have a question about your
	Incite 9i computer that this	CLKTMEAVGMAXTRPAVG
	manual does not cover, consult

your Trek dealer. If you have a question or problem that your Trek dealer can’t handle, contact us at:

Trek Bicycle Corporation Attn: Customer Service 801 W. Madison Street Waterloo, Wisconsin 53594 http://www. trekbikes.com (920) 478-4670

© Copyright Trek Bicycle Corporation 2006 All rights reserved

Image 1

Contents Copyright Trek Bicycle Corporation 2006 All rights reserved Trek Incite 9iContents Watch the road when riding Safety and general guidelinesFunction Explanation FunctionsCAD Stem mount Handlebar Speed sensor InstallationMount 31.8mm bars large clamp 25.4mm and 26.0mm small clamp To install the computer on handlebarMake sure the com- puter cannot be bounced off To install the computer on the stemPlacing the magnet To install the wheel magnetTo attach the computer wire Attaching the computer wireSensor can be rotated around the fork about 45 degrees To install the sensor0mm Tighten the nylon ties and trim the excess length Figure Easy setup ReSet To set the units Using the buttonsSet ModeTo set the odometer Temperature icon displayMH and KMH interchange on the screen Computer returns to the start screenWheel Select icon appears on the screen To set wheel sizeWheel size appears Wheel size changesTo select the wheel for use Cycle Mode to TRP12 or 24 flashes To set Clock24 interchange on the screen Hour changesTo ReStart set the Trip data to zero Max setting ReStarts at ‘0’Using the computer in wet weather Changing modeAdditional information Removing the computer from the computer baseTroubleshooting To replace the battery Replacing the batteryBe careful to avoid losing the rubber O-ring seal ‘cross’ on the bat- tery points up Replacing the BatterySelecting the custom value 4-digit number Setting custom wheel sizeTo set the computer Left-hand digit flashes Measuring rollout for wheel size To measure rollout for wheel sizeThis warranty covers Limited WarrantyThis warranty does not cover