Trek 9i, 11i owner manual Functions, Function Explanation

Page 4

Functions

Table 1- Function abbreviations, names, and explanations

	Function	Explanation

	Clock	Time of day
	CLK	Displays in hours and minutes, or stopwatch	CLK
	TME	showing seconds.	CLK
	TME	showing seconds.
		12-hour with AM/PM or 24-hour format
		Highest reading: 23:59 (clock)
		or 23:59:59 (stopwatch)

	Odometer	Distance ridden
	ODO	Displays in miles or kilometers.
		TRP-Trip (since last Restart)	MH
		TTL- Total since last Reset
		Highest reading: 99,999	ODO
			ODO

	Pacer	Always displays
		Indicates whether current speed is faster or slower
		than average speed
		Displayed by arrow pointing up (faster) or down
		(slower).

MH

Functions

Image 4

Contents Trek Incite 9i Copyright Trek Bicycle Corporation 2006 All rights reservedContents Safety and general guidelines Watch the road when ridingFunctions Function ExplanationCAD Stem mount Handlebar Speed sensor InstallationMount To install the computer on handlebar 31.8mm bars large clamp 25.4mm and 26.0mm small clampTo install the computer on the stem Make sure the com- puter cannot be bounced offTo install the wheel magnet Placing the magnetAttaching the computer wire To attach the computer wireSensor can be rotated around the fork about 45 degrees To install the sensor0mm Tighten the nylon ties and trim the excess length Figure Easy setup ReSet Using the buttons To set the unitsSet ModeTemperature icon display To set the odometerMH and KMH interchange on the screen Computer returns to the start screenTo set wheel size Wheel Select icon appears on the screenWheel size appears Wheel size changesCycle Mode to TRP To select the wheel for useTo set Clock 12 or 24 flashes24 interchange on the screen Hour changesMax setting ReStarts at ‘0’ To ReStart set the Trip data to zeroChanging mode Using the computer in wet weatherAdditional information Removing the computer from the computer baseTroubleshooting Replacing the battery To replace the battery‘cross’ on the bat- tery points up Replacing the Battery Be careful to avoid losing the rubber O-ring sealSelecting the custom value 4-digit number Setting custom wheel sizeTo set the computer Left-hand digit flashes To measure rollout for wheel size Measuring rollout for wheel sizeThis warranty covers Limited WarrantyThis warranty does not cover