ProForm PFTL20511.0 user manual HOW to USE the Equipment Settings Mode

Page 29

HOW TO USE THE EQUIPMENT SETTINGS MODE

The console features an equipment settings mode that allows you to select a language, the unit of mea- surement, and a timezone; to turn on and turn off the display demo mode; and to enable or disable the key and/or a passcode.

1. Select the settings main menu.

Insert the key into the console (see HOW

TO TURN ON THE POWER on page 22).

Next, select the main menu (see step 2 on page 24). Then, touch

the gears button near the lower right corner of the screen to select the settings main menu.

2.Select the equipment settings mode.

In the settings main menu, touch the Equipment Settings button.

3.Select a language.

To select a language, touch the Language button and select the desired language. Then, touch the back button on the screen to return to the equip- ment settings mode. Note: This feature may not be enabled.

4.Select the unit of measurement.

Touch the US/Metric button to view the selected unit of measurement. Change the unit of measure- ment, if desired. Then, touch the back button on the screen.

5.Select a timezone.

Touch the Timezone button. Select your local time- zone to have the console sync to your local time. Then, touch the back button.

6.Turn on or turn off the display demo mode.

The console features a display demo mode, designed to be used if the treadmill is displayed

in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the screen will show a demo presentation.

To turn on or turn off the display demo mode, first touch the Demo Mode button. Next, touch the On checkbox or the Off checkbox. Then, touch the back button on the screen.

7.Enable or disable the key.

Note: This feature may not be enabled on your treadmill.

You can disable the key so that the treadmill does not require the use of the key if desired. Touch the Safety Key button. To disable the key, touch the Disable checkbox. CAUTION: Read the safety warning on the screen before disabling the key. To enable the key again, touch the Enable checkbox.

8.Enable or disable a passcode.

The console features a child safety passcode, designed to prevent unauthorized users from using the treadmill.

Touch the Passcode button. To enable a pass- code, touch the Enable checkbox. Then, enter a

4-digit passcode of your choice. Touch Save to use this passcode. Touch Cancel to return to the equip- ment settings mode and not use a passcode. To disable the passcode, touch the Disable checkbox.

Note: If a passcode is enabled, the console will regularly ask for you to enter the passcode. The console will remain locked until the correct pass- code is entered. IMPORTANT: If you forget your passcode, enter the following master passcode to unlock the console: 1985.

9.Exit the equipment settings mode.

To exit the equipment settings mode, touch the back button on the screen.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Model No. PFTL20511.0 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Page Power Lines Before YOU Begin Part Identification Chart Make sure that the power cord is unplugged AssemblyBe careful not to pinch the Upright Wire See the inset drawing. Tie the wire tieTighten the Screws yet. Note It may be help Attach the Right Upright not shownBase Covers into place yet Page Cable from the console assembly Wire. See the inset drawing. The connectorsShould slide together easily and snap into Again. if YOU do not Connect the CONPage Make sure that the caps remain in the ends Storage Latch Screws before tightening them TV Assembly Care and Maintenance HOW to PUT on the Heart Rate MonitorTroubleshooting Chest Heart Rate MonitorUse a Surge Suppressor HOW to Connect the TreadmillHOW to Connect the Power Cord Ohm Flat Wire HOW to Connect AN AntennaHOW to Connect AN External Source Using a Catv Cable Ohm Catv CableHdmi Diagram Operation and AdjustmentFeatures of the Console ConsoleHOW to USE the Touch Screen HOW to Turn on the PowerConnect to your wireless network Check for firmware updates HOW to SET UP the ConsoleCalibrate the incline system Create an iFit Live accountHOW to USE the Manual Mode Power cord. Important If you do not do When you are finished exercising, removeKey from the console This, the treadmill’s electrical components mayStart the workout HOW to USE AN Onboard WorkoutSelect an onboard workout Select the main menu. See on Select a set-a-goal workout HOW to USE a SET-A-GOAL WorkoutStart the workout. See on HOW to USE AN Ifit Live WorkoutHOW to USE the Equipment Settings Mode Find keycodes HOW to USE the Maintenance ModeExit the maintenance mode Enable Wi-Fi HOW to USE the Wireless Network ModeSet up and manage a wireless network connection Exit the wireless network modeHOW to USE the Internet Browser HOW to USE the Stereo Sound SystemHOW to USE the Entertainment Mode HOW to Operate the 15 Digital TVHOW to Replace the Batteries in the Remote Control HOW to USE the Remote ControlAdjust the image settings HOW to Adjust the Television SettingsAdjust the audio settings Adjust the channel settingsSet up the basic television settings Adjust the parental control settingsAdjust the advanced television settings Exit the menuHOW to Fold the Treadmill HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USESymptom The power turns off during use TroubleshootingTop View Symptom The walking belt slows when walked onSymptom The television is not receiving a signal Symptom The volume cannot be turned up Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencyKey No. Qty Description Part ListExploded Drawing a Exploded Drawing B Exploded Drawing C Exploded Drawing D Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty
Top Page Image Contents