Suunto VYTEC DS manual Dive Planning Simulator 2 Simplan, SET Modes 3 SET

multiple gas mixes are set they will be changed as soon as allowed maximum depth is reached upon ascent and in the order of: MIX1, MIX2 and MIX3

To enter the Dive Simulator mode select MODE- 2 SIMUL- 1 SIMDIVE (Fig. 4.17. and 4.18.).

4.2.2.Dive Planning Simulator [2 SIMPLAN]

The Dive Planning Simulator mode shows you the present no-decompression limits. In this mode, you are also able to add the desired surface interval increment to present surface interval time, which allows you to plan your dives in advance.

This mode is also used to add the desired surface intervals for dive simulations. Add the desired surface interval increment to present surface interval by pressing the arrow down (TIME) and arrow up (PLAN) buttons.

NOTE! This display is only shown for repeti- tive dives.

To enter the Dive Planning Simulator mode select MODE- 2 SIMUL- 2 SIMPLAN (Fig. 4.19.).

NOTE! The Dive Planning Simulator mode is disabled in Gauge mode and in Error mode (see section 3.9. ”Error Conditions”).

SURF

OK

TIME

Fig. 4.20. Selected Dive Planning Simulator mode. Add desired surface interval incre- ment (to present shown surface interval) by pressing TIME and PLAN buttons. This display is only shown

for repetitive dives.

DIVE

MAX

QUIT

NO DEC TIME

Fig. 4.21. Dive Planning Simulation.

4.3. SET MODES [3 SET]

The Set Modes (Fig. 4.22.) are divided into three submodes for setting the dive-related parameters, time-related parameters and your personal preferences.

QUIT

OPTIONS

Fig. 4.22. Setting Op- tions. [3 SET].

51