6.0PC SOFTWARE OPERATION
The TCS22 system can be remotely or directly controlled through a personal computer. Bard supplies a software system, the Telcom ClimateWatch System Software, to communicate with and control the TCS22 controller from a personal computer.
6.1ClimateWatch System Software Overview
The ClimateWatch system software consists of ASI Expert software and custom TCS22 controller programs and Screens designed to provide easy access to the features of the TCS22 controller.
The software program allows setup of a control file that specifies site names and additional information for remote access. It also creates directories and sets up files for the storage of the trend information. The program is used to dial up, monitor, and control the
It is also used to upload trend information from the sites and store it in a database file to be viewed from Microsoft Access or Excell. The program is used to display the alarm history for troubleshooting purposes.
6.2Installation
6.2.1HARDWARE REQUIREMENTS
Personal Computer running Windows 98 or higher.
32 MB of Available RAM memory
10 MB of Available Hard disk space
Hayes Compatible modem operating at 9600 Baud capable of direct asynchronous communications with no error checking or data compression. Needed for remote site access to the TCS. A phone line must be connected to the TCS modem and the remote computer modem.
A 25/9 pin female to 9 pin male RS232 cable. Needed for direct connect access to the TCS22 with a Laptop or portable PC. This cable should be connected to the computer serial port to the 9 pin
6.2.2SOFTWARE INSTALLATION
1.Start Windows.
2.Insert TCS22 Master Controller Software CD into CD Drive
3.Follow instructions on the inside cover of the CD to complete setup.
Page 48