JVC RX-730R manual Basic Settings, Adjusting the Front Speaker Output Balance, Function

English

Basic Settings

Some of the following settings are required after connecting and positioning your speakers in your listening room, while others will make operations easier.

See also page 37.

MENU

Adjusting the Front Speaker Output Balance

If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output balance.

SETTING On the front panel:

1.Press SETTING so that the Control % / Þ/ @/ #buttons work for adjusting the balance. The lamp next to the button lights up.

2.Press Control % / Þuntil “BALANCE” appears on the display.

3.Press Control @ / # to adjust the balance.

•Pressing Control @ decreases the right channel output.

•Pressing Control # decreases the left channel output.

From the remote control:

Press BALANCE L/R (–/+).

• Pressing BALANCE L (–) decreases the right channel output.

• Pressing BALANCE R (+) decreases the left channel output.

L BALANCE R

Front panel

See also page 38.

MENU

Listening at Low Volume (Loudness)

Human ears are not sensitive to bass at low volume. To compensate for this, the loudness function automatically boosts the bass level as you lower the volume.

Note:

The loudness function affects the front speaker sounds only.

On the front panel only:

1. Press SETTING so that the Control % / Þ/ @/ #buttons work for setting the loudness

SETTING

function.

The lamp next to the button lights up.

2.Press Control %/ Þuntil “LOUDNESS” appears on the display.

3.Press Control @/ # to set the loudness function to “ON” or “OFF.”

• Select “ON ” to activate the loudness function.

The LOUDNESS indicator lights up on the display.

• Select “OFF” to cancel it.

The indicator goes off.

Front panel

Page 15