JVC RX-730R manual Using Dolby Surround

DOLBY SURROUND

DOLBY SURROUND

See also page 40.

MENU

Using Dolby Surround

English

SURROUND MODE

Front panel

SURROUND

MODE

Remote: Outside

Once you have set the Dolby Surround adjustments, you can use the same adjustment every time you want to enjoy Dolby Surround.

The receiver memorizes two sets of Dolby Surround adjustment; one for Pro Logic and the other for 3ch Logic.

On the front panel:

1.Press SURROUND MODE so that the Control % / Þbuttons work for selecting the surround modes.

The lamp next to the button lights up.

2.Press Control %/ Þ until “PROLOGIC” or “3CHLOGIC” whichever you want appears on the display.

The PRO LOGIC or 3CH LOGIC indicator (as well as the SURROUND indicator) also lights up. Each time you press the button, the surround modes change as follows (the indicator of the selected surround mode also lights up on the display):

PROLOGIC 3CHLOGIC HALL

SURR OFF

(Surround Off)

3. Select and play a sound source which was processed with Dolby Surround and is labeled with mark.

To cancel the surround mode, press Control %/ Þuntil “SURR OFF” appears in step 2 above. The indicator of the selected mode goes off.

From the remote control:

1.Press SURROUND MODE until the surround mode you want appears on the display.

The PRO LOGIC or 3CH LOGIC indicator (as well as the SURROUND indicator) also lights up. Each time you press the button, the surround modes change as follows (the indicator of the selected surround mode also lights up on the display):

PROLOGIC 3CHLOGIC HALL

SURR OFF

(Surround Off)

2. Select and play a sound source which was processed with Dolby Surround and is labeled with mark.

To cancel the surround mode, press SURROUND MODE until “SURR OFF” appears on the display. The indicator of the selected mode and the SURROUND indicator go off.

Page 36