JVC RX-730R manual Press Test to start checking the speaker output balance

English	TEST
	6

Remote: Inside

– CENTER +		– REAR	+
3	4	7/P	8

Remote: Inside

TEST

6

Remote: Inside

4.Press TEST to start checking the speaker output balance.

“TEST” starts flashing on the display, and a test tone comes out of the speakers in the following order:

Left front speakerCenter speaker Right front speaker Rear speakers

Notes:

•No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”

•No test tone comes out of the center speaker when you select “PHANTOM” or “OFF” for the center mode.

5.If necessary, adjust the speaker output level as follows:

•To adjust the rear speaker output level, press REAR +/–.

•To adjust the center speaker output level, press CENTER +/–.

Pressing – decreases the output level up to –10 dB.

Pressing + increases the output level up to +10 dB.

Notes:

•You cannot adjust the left and right rear speaker output level separately.

•You cannot adjust the rear speaker output level when you have selected “3CHLOGIC.”

•You cannot adjust the center speaker output level when you select “PHANTOM” or “OFF” for the center mode.

6.Press TEST again to stop the test tone.

Page 35