Activating the DSP Modes
You can use only one DSP mode at a time. When a DSP mode is activated, another DSP mode is canceled if in use.
For Dolby Pro Logic, Dolby Digital, and DTS Digital Surround
1.Press SURROUND ON/OFF.
•Each time you press the button, the Dolby/DTS Surround turns on and off alternately.
SURROUND ON/OFF
| SURROUND |
| ON/OFF |
On the front panel | On the remote control |
For the other DSP modes
1.Press DSP MODE repeatedly until the mode you want appears on the display.
•Each time you press the button, the DSP modes change. (See page 22 for more details.)
DSP MODE
DSP
MODE
On the front panel On the remote control
2. Select and play a sound source.
• To enjoy JVC Theater Surround, play back a software encoded
with Dolby Surround and labeled with |
|
| DOLBY SURROUND | mark. |
2. Select and play a sound source.
• To enjoy Dolby Pro Logic, play back a software encoded with
Dolby Surround and labeled with 
mark.
•To enjoy Dolby Digital, play back a software encoded with Dolby Digital and labeled with D I G I T A L mark.
•To enjoy DTS Digital Surround, play back a software encoded
with DTS Digital Surround and labeled with 
mark.
To cancel the Dolby/DTS Surround mode
Press SURROUND ON/OFF again. (“SURROUND OFF” appears on the display.)
SURROUND ON/OFF
SURROUND
ON/OFF
To cancel the DSP mode
Press DSP MODE repeatedly until “DSP OFF” appears on the display.
DSP MODE
DSP
MODE
On the front panel | On the remote control |
On the front panel | On the remote control |
26