JVC RX-7010VBK manual Release CATV/DBS Power, For Catv converter, For DBS tuner

To change the transmittable signals for operating a CATV converter or DBS tuner

1.Press and hold CATV/DBS POWER.

2.Press CATV/DBS CONTROL.

3.Enter manufacturer’s code using buttons 1–9,

and 0.

See the list to the right to find the code.

4. Release CATV/DBS POWER.

The following buttons can be used for operating the CATV converter or DBS tuner:

CATV/DBS POWER:	Turns on and off the CATV converter
	or DBS tuner.
CH +/–:	Changes the channels.
1 – 10, 0, 100+ (+10):	Selects the channels.
	The 10 button will function as the
	ENTER button if your equipment
	requires pressing ENTER after
	selecting a channel number.

Note:

Refer to the manual supplied with your CATV converter or DBS tuner.

5. Try to operate your CATV converter or DBS tuner by pressing CATV/DBS POWER.

When your CATV converter or DBS tuner turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

CATV converter or DBS tuner , try each one until the correct one is entered.

Note:

You cannot use both the CATV converter and DBS tuner at the same time.

For CATV converter

Manufacturer	Codes
GENERAL INSTRUMENT	06, 07, 08, 09, 10,
	11, 12, 13, 14, 29
HAMLIN/REGAL	01, 02, 03, 04, 05
JERROLD	06, 07, 08, 09, 10,
	11, 12, 13, 14
OAK	15, 16, 17
PANASONIC	18, 19, 20
PIONEER	21, 22
SCIENTIFIC ATLANTA	23, 24, 25
TOCOM	26
ZENITH	27, 28

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

For DBS tuner
Manufacturer	Codes
JVC	56, 57, 67
AMSTRAD	43, 44, 45, 46, 47
BLAUPUNKT	30
ECHOSTAR	50, 51, 67
GOLDSTAR	31
GRUNDIG	32, 33
HIRSHMANN	48, 52, 53, 55
INSTRUMENT	68
ITT/NOKIA	34
KATHREIN	52, 58, 61, 62, 63
NEC	35, 36
ORBITECH	48
PHILIPS	37, 38
RCA	65
SAMSUNG	39, 40
SCHWAIGER	61, 64
SIEMENS	41, 42
SONY	66
TECHNISAT	48

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

35