Operating JVC’s Audio/Video Components, Tuner

Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC components are preset in the remote control.

Operating Audio Components

IMPORTANT:

To operate JVC’s audio components using this remote control:

•You need to connect JVC audio components through the COMPU LINK (SYNCHRO) jacks (see page 28) in addition to the connections using cables with RCA pin plugs (see pages 5 and 6).

•Aim the remote control directly at the remote sensor on the receiver.

•If you use the buttons on the front panel, the remote control will not operate that source. To operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.

•To operate the cassette deck or CD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 13.)

•Refer also to the manuals supplied with your components.

CATV/DBS	VCR	TV	AUDIO
POWER	POWER	POWER	POWER
DVD DVD MUILTI		CD	FM/AM
TV/DBS	VCR	TAPE/CDR	PHONO
− BASS	+	−TREBLE+
SURROUND	DSP ANALOG/DIGITAL		SLEEP
ON/OFF	MODE	INPUT
BASSBOOST	EFFECT	– CENTER+
	1	2	3
		MENU
	TEST	– REAR• L+
	4	5	6
		ENTER
SOUND		– REAR• R+
	7/P	8	9
MUTING		–SUBWOOFER+
	10	0	+10
	RETURN	FMMODE	100+
CATV/DBS
CONTROL	+	+	+
	+	+	+
TV/VIDEO	CH	TV VOL	VOLUME
TV/VIDEO	−	−	−
+		PLAY
+
TUNING	/REW	PAUSE	FF/
−
REC
PAUSE
		STOP	CONTROL

RM-SRX7010J

A/V CONTROL RECEIVER

*When you press one of the following buttons, the remote control operation mode appears on the display window for about 10 seconds.

						Ex.: When you
						Ex.: When you
						press CD button

Buttons on the Remote Control						Remote Control Operation Mode

FM/AM						TUNER
CD						CD
PHONO						PHONO
TAPE/CDR						TAPE
DVD						DVD
DVD MULTI						DVD
TV/DBS						TV
VCR						VCR
CATV/DBS CONTROL						DBS
CONTROL						Current setting or VCR or TAPE
						or CDDSC
SOUND						SOUND

Tuner

You can always perform the following operations:

FM/AM: Alternates between FM and AM.

After pressing FM/AM, you can perform the following operations:

1 – 10, +10: Selects a preset channel number directly. For channel number 5, press 5.

For channel number 15, press +10, then 5. For channel number 20, press +10, then 10.

TUNING +/–: Tunes into stations.

FM MODE: Changes the FM reception mode.

Sound control section (Amplifier)

You can always perform the following operations:

SURROUND ON/OFF: Turns on or off the Surround modes –

	Dolby Pro Logic, Dolby Digital, and
	DTS Digital Surround.
DSP MODE:	Selects the DSP modes.

After pressing SOUND, you can perform the following operations:

SUBWOOFER +/–: Adjusts the subwoofer output level.

CENTER +/–:	Adjusts the center speaker output level.
REAR•L +/–:	Adjusts the left rear speaker output level.
REAR•R +/–:	Adjusts the right rear speaker output level.
EFFECT:	Selects the effect level.
TEST:	Turns on or off the test tone output.

Note:

After adjusting sounds, press the corresponding source selecting button to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.

CD player

After pressing CD, you can perform the following operations on the CD player:

PLAY3:	Starts playing.
4:	Returns to the beginning of the current (or
¢:	previous) track.
¢:	Skips to the beginning of the next track.
STOP7:	Stops playing.
PAUSE8:	Pauses playing. To release it, press PLAY3.
1 – 10, +10:	Selects a track number directly.
	For track number 5, press 5.
	For track number 15, press +10, then 5.
	For track number 20, press +10, then 10.
	For track number 30, press +10, +10, then 10.