Weider WEBE37330 user manual Tighten the M10 Nylon Locknuts 34 used Steps

23. Press two 48mm Weight Carriage Caps (63) into	23
the Weight Carriage (62).			102
		63
Insert an M10 x 19mm Bolt (102) into the bracket		62
on the Weight Carriage (62) from the side shown.
Slide the Weight Carriage (62) onto the Weight
Guide Upright (42) so that the weight tube is		Weight	63
toward the Center Upright (45).		Tube
			42
		45
24. Press two 60mm Square Inner Caps (64) into the	24
Weight Guide Top Frame (49).
		32
Attach the Weight Guide Top Frame (49) to the			64
Weight Guide Upright (42) with two M10 x 75mm
Bolts (92), four M10 Washers (35), and two M10
Nylon Locknuts (34). Do not tighten the		49	35
Locknuts yet.
Attach the Weight Guide Top Frame (49) to the		34	35
			35
Center Top Frame (46) with two M10 x 78mm
			92
Bolts (32) and two M10 Nylon Locknuts (34).		46
			35
Tighten the M10 Nylon Locknuts (34) used in	64	34	42
steps 12–24.
			34
25. Attach the Butterfly Bracket (55) to the Center	25
Upright (45) with two M10 x 78mm Bolts (32), two
M10 Washers (35), and two M10 Nylon Locknuts
(34).
			35
		32
		55	34
			35
		32
			45
	14