Weider WEBE37330 user manual Other Small Base Cap in the same manner

2. Attach a Small Base Cap (20) to the Bench Base	2
(3) with two M4 x 16mm Screws (36). Attach the				14
other Small Base Cap in the same manner.
Press the 51mm x 76mm Inner Cap (14) into the				4
indicated end of the Bench Leg (4).
Attach the Bench Leg (4) to the Bench Base (3)				34
with four M10 x 71mm Bolts (31), two Bench
Base Joint Plates (25), and four M10 Nylon		20
Locknuts (34). Do not tighten the Locknuts yet.				25
		31	25
			31	3
			20
				36
3. Attach the Bench Leg (4) to the Bench Frame (1)	3
with four M10 x 94mm Bolts (98), two Bench Joint				24
			34
Plates (24), and four M10 Nylon Locknuts (34).
Tighten the M10 Nylon Locknuts (34) used in				1
steps 1–3.
		4		24
				98
4. Press two 38mm x 50mm Inner Caps (15) into	4		30
the Backrest Frame (6).
				35
Attach the Backrest Bracket (16) to the Backrest			35	15
Frame (6) with two M10 x 56mm Bolts (30), two				6
M10 Washers (35), and two M10 Nylon Locknuts
(34).
		15
			16
				34
5. Press a 38mm x 50mm Inner Cap (15) into the	5
Seat Frame (7).			30
				35
Attach the Seat Bracket (17) to the Seat Frame			35	15
(7) with two M10 x 56mm Bolts (30), two M10
Washers (35), and two M10 Nylon Locknuts (34).
Do not tighten the Locknuts yet.				7
				17
			34	34

7