Weider WEBE37330 user manual Assemble the other Pad Tube 27 in the same manner

Page 9

10.Press two 25mm Square Inner Caps (28) into a Pad Tube (27). Slide the Pad Tube into a hole in the Leg Lever (5). Slide two Foam Pads (26) onto the Pad Tube.

Assemble the other Pad Tube (27) in the same manner.

11.Press a 45mm Square Inner Cap (12) into the bottom of the Curl Post (8).

Attach the Curl Pad (9) to the Curl Post (8) with two M6 x 16mm Screws (29).

12.Attach a Large Base Cap (70) to the Left Base (40) with two M4 x 16mm Screws (36). Attach another Large Base Cap to the other end of the Left Base in the same manner.

Attach the Left Base (40) to the Center Base (39) with two M10 x 78mm Bolts (32) and two M10 Nylon Locknuts (34). Do not tighten the

Locknuts yet.

Repeat this step with the Right Base (not shown).

Insert two M10 x 75m Carriage Bolts (90) up through the Center Base (39).

10	5
	27
26	28
	28
	27	26
		28
11
	9
		8
		29
	12
12
		39
		34
	90
	32	70
70
	40
36

9

Image 9

Contents QUESTIONS? Model No. WEBE37330 Serial NoCustomer HOT Line Table of Contents Decal Important Precautions Before YOU Begin Right SideLeft Side Assembly Make Things Easier for YourselfDo not tighten the Locknuts yet Other Small Base Cap in the same manner Locknuts 34. Do not tighten the Locknuts yetTighten the M10 Nylon Locknuts 34 used Steps Page Locknuts yet Repeat this step with the Right Base not shown Assemble the other Pad Tube 27 in the same mannerHoles 110 Tighten the Locknuts yet Locknuts yet Tighten the M10 Nylon Locknuts 34 used Steps Right Safety Spotter not shown in the same Manner Locate the Medium Cable 69. Route the Cable Locate the Butterfly Cable 109. Attach Cable Trap is oriented to hold the CableGroove of the Pulley Is shown pulled away from the Center Upright for clarity Adjusting the Backrest and Seat AdjustmentsSeat 10 can be adjusted in the same man- ner Attaching the Curl PAD or LEG LeverAdding Weight to the Weight Carriage Adding Weight to the LEG LeverAttaching the Accessories Using the AB SlingsSetting UP for Squat Exercises Using the Weight Rests and Safety SpottersAttaching the DIP ARM Knobs 22 are fully tightenedTightening the Cables Moving the BenchMedium Cable Cable DiagramsButterfly Cable Long CableExercise Guidelines Muscle Chart Cooling DownStaying Motivated Date Exercise Weight Sets RepsAerobic Exercise Thursday Aerobic Exercise DateMonday R0803B Part Identification CHART-Model No. WEBE37330Page 48mm Weight Carriage Cap Qty Description Part LIST-Model No. WEBE37330Exploded DRAWING-Model No. WEBE37330 Exploded Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT