Weider WEBE37330 user manual Locate the Medium Cable 69. Route the Cable

29. Locate the Medium Cable (69). Route the Cable	29
up through the Weight Guide Top Frame (49) and				49
over a Pulley (87). Attach the Pulley inside the
Top Frame with an M10 x 75mm Bolt (92), two	34	87
M10 Washers (35), two 17mm Spacers (89), and
an M10 Nylon Locknut (34).	35
	89		35
			89
			92
			69
30. Route the Medium Cable (69) over a Pulley (87)	30	34			49
and down through the Weight Guide Top Frame			35	87
(49). Attach the Pulley inside the Top Frame with			89
an M10 x 75mm Bolt (92), two M10 Washers
(35), two 17mm Spacers (89), and an M10 Nylon					89
Locknut (34).
	69				35
					92
31. Wrap the Medium Cable (69) under a Pulley (87).	31
Attach the Pulley and a Cable Trap (88) to the
indicated hole in the Pulley Plates (82) with an
M10 x 45mm Bolt (33) and an M10 Nylon Locknut			69
(34). Make sure the Cable Trap is oriented to	34
hold the Cable in the groove of the Pulley.			87
			88
			82	33
32. Route the Medium Cable (69) up through the	32
Weight Guide Top Frame (49), over a Pulley (87),			87
and back down through the Top Frame. Attach	34		69	49
the Pulley inside the Top Frame with an M10 x
	35
75mm Bolt (92), two M10 Washers (35), two
		89
17mm Spacers (89), and an M10 Nylon Locknut				89
(34).
					92
				35
33. Attach the Medium Cable (69) to the M10 x	33
19mm Bolt (102) in the Weight Carriage (62) with			69
an M10 Nylon Locknut (34).
			34		102
			62

16