Weider WESY97300 user manual Be sure that Cable Trap is turned to hold the Cable, Pulley as shown

CABLE ASSEMBLY

29. Wrap the Low Cable (86) around a 3 1/2”			29
Pulley (15). Attach the Pulley and a Cable				86
Trap (66) to the Press Frame (17) with a 3/8”
x 3 1/2” Bolt (16), a 3/8” Washer (9) and a					16
3/8” Nylon Locknut (21).		Be sure that the		9
Cable Trap is turned to hold the Cable in
				15
place and that the Cable is routed around
the Pulley as shown.
					66
				17	21
30. Wrap the Low Cable (86) around a “V”-Pulley			30	85
(6). Attach the “V”-Pulley to the indicated hole
in the Front Upright (42) with a 3/8” x 3 1/4”				9
Bolt (85), a 3/8” Washer (9), and a 3/8” Nylon				6
Locknut (21).	Be sure that the Cable is in		42
the groove of the “V”-Pulley and that the
Cable is routed around the “V”-Pulley as
shown.
			21
				86
31. Wrap the Low Cable (86) around a 3 1/2”			31
Pulley (15). Attach the Pulley and a Cable
Trap (66) to the Press Frame (17) with a 3/8”
x 3 1/2” Bolt (16), a 3/8” Washer (9), and a
3/8” Nylon Locknut (21).		Be sure that the		15	21
Cable Trap is turned to hold the Cable in
place and that the Cable is routed around			86		66
the Pulley as shown.
				9
			16	17
32. Wrap the Low Cable (86) around a 3 1/2”			32
Pulley (15). Attach the Pulley and a Cable
				42
Trap (66) to the indicated hole in the Front
Upright (42) with a 3/8” x 3 3/4” Bolt (71), a					21
3/8” Washer (9), and a 3/8” Nylon Locknut				9
(21). Be sure that the Cable Trap is turned				86
to hold the Cable in place and that the
Cable is routed around the Pulley as				15
shown.
				66
				71

15