Weider WESY97300 user manual Cable Assembly, Be sure that, Pulley Bracket must

CABLE ASSEMBLY

16. Wrap the High Cable (23) around a “V”-Pulley					16
(6). Attach the “V”-Pulley and a Long Cable
						7
Trap (50) to the indicated bracket on the
Front Upright (42) with a 3/8” x 2 1/2” Bolt (7)						6	50
and a 3/8” Nylon Locknut (21).			Be sure that
the Long Cable Trap is positioned to hold							23
the Cable in place.
							42
					21
17. Route the High Cable (23) around the “V”-					17
Pulley (6) on the Left Arm (47).				Be sure that
						7	50
the Cable is in the groove of the Pulley					6
and that the Long Cable Trap (50) is posi-
tioned to hold the Cable in place.				Tighten
the 3/8” x 2 1/2” Bolt (7) and the 3/8” Nylon
Locknut (not shown).
					23	47
18. Route the High Cable (23) around the “V”-					18
Pulley (6) on the Right Arm (48).				Be sure
that the Cable is in the groove of the “V”-						7
Pulley and that the Long Cable Trap (50) is
turned to hold the Cable in place.				Tighten
the 3/8” x 2 1/2” Bolt (7) and the 3/8” Nylon
Locknut (not shown).
						6	23
					50	48
19. See the inset drawing. Lubricate the 5/16” x					19
5” Bolt (68). Attach the Pulley Bracket (20) to
the Top Frame (55) with the Bolt and a 5/16”
Nylon Locknut (3).		The Pulley Bracket must
be oriented as shown.					68	20
Route the High Cable (23) around the 3				.1/2”
						66
Pulley (15) attached to the Pulley Bracket					55
						12
(20).	Be sure that the Cable is in the						15
groove of the Pulley and that the Cable
Trap (66) is turned to hold the Cable in
place.	Tighten the 3/8” x 2” Bolt (12) and the				20
3/8” Nylon Locknut (not shown).						23
					3

11