Weider WESY86301 user manual Locate and open the parts bag labeled Seat Assembly

SEAT ASSEMBLY

51.Locate and open the parts bag labeled “SEAT ASSEMBLY.”

Attach the Small Backrest (18) to the Ab Upright (1) with two 1/4” x 2 1/2” Machine Screws (64) and two 1/4” Washers (37).

52.Press a 1 1/2” Square Inner Cap (57) into the Rear Seat Frame (16).

Insert a 1/4” x 2” Carriage Bolt (61) through the center hole in a Seat Plate (41). Attach the Seat Plate to the Seat (17) with two 1/4” x 1/2” Screws (59).

Insert the 1/4” x 2” Carriage Bolt (61) through the indicated hole in the Rear Seat Frame

(16). Tighten a 1/4” Nylon Locknut (44) with a 1/4” Washer (37) onto the Carriage Bolt.

Attach the other end of the Seat (17) to the Rear Seat Frame (16) with a 1/4” Washer (37) and a 1/4” x 2” Machine Screw (63).

53.Press a 1 1/2” Square Inner Cap (57) into the Leg Lever (15).

Lubricate the 5/16” x 2 1/4” Bolt (62). Attach the Leg Lever (15) to the Rear Seat Frame

(16)with the Bolt and a 5/16” Nylon Locknut

(40).Do not overtighten the Nylon Locknut; the Leg Lever must pivot freely.

Insert the 5/16” x 2” Eyebolt (79) into the Leg Lever (15) from the direction shown. Tighten a 5/16” Nylon Locknut (40) with a 5/16” Washer

(20) onto the Eyebolt.

54.Rest the slot in the Rear Seat Frame (16) on the indicated post in the Ab Upright (1). Attach the Rear Seat Frame to the Ab Upright with a 5/16” x 2 3/4” Carriage Bolt (77) and the Seat Knob (30).

20

51
		1
			37
			64
18
52
			17
57	61
	41	59
16		37	63
	44
53
		16
40
15		62—Lubricate
20		79
40
	57
54		30
			16
			1
			77
			Post
		Slot