Weider user manual Model No. WESY74090 Serial No, Serial Number Decal

Page 1

Model No. WESY74090

Serial No.

The serial number is found in the location shown below. Write the serial number in the space above.

Serial

Number

Decal

QUESTIONS?

We are committed to providing complete customer satisfaction.

If you have questions, or if there are missing or damaged parts,

we will guarantee complete satis- faction through direct assistance from our factory.

TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER

HOT LINE. The trained techni- cians on our customer hot line will provide immediate assis- tance, free of charge to you.

CUSTOMER HOT LINE:

1-888-936-4266

Mon.–Fri., 8 a.m.–6:30 p.m. EST (excluding holidays)

CAUTION

Read all precautions and instruc- tions in this manual before using this equipment. Save this manu- al for future reference.

®

USER’S

MANUAL

PATENT PENDING

Image 1

Contents Serial Number Decal Model No. WESY74090 Serial NoLimited Warranty Table of ContentsPrecautions before using the weight system Important PrecautionsMake sure the cables remain on the pulleys Keep hands and feet away from moving partsBefore You Begin Using the Weider Weight SystemTo make the assembly process as smooth as possi AssemblySee the inset drawing Locate and open the parts bag labeled Frame AssemblyBolts with two 5/16 Nylon Locknuts Tighten the Nylon Locknuts yetSupport Tighten all Nylon Locknuts used in steps 1 throughLocate and open the parts bag labeled ARM Locknut 3 do not tighten at this timeMake sure the welded tab on the Press Frame Is oriented as shownRight Axle with a hammer ArmCable Trap is oriented as shown Short Cable 58 is between the Pulley 158 x 1 Bolt 59, a 3/8 Plain Nut 56 and a 3/8 Spacer15b Ing the following steps. Note Make sure the Pulley Onto the Bolt to prevent the Pulley from falling off durFrom Pulley To Pulley BracketMake sure the Cable Trap is oriented as shown Bolt 12 and a 3/8 Nylon Locknut 21. NoteSpacer To the Seat 13 with two 1/4 x 3/4 Screws Shooting and Maintenance on Cable Diagram76, 87 1/2 Long CableCise will be reduced AdjustmentPin Make sure the Cable Trap is oriented as shown Re-install it Trouble-shooting and MaintenanceWoven cable, the type of cable used on the home gym Additional slack can be removed by moving the upperCables, pulleys, and weight guides Weight Resistance ChartLbs 101 120 121 138 103Part No J00885-C R0700A Ordering Replacement PartsWESY74090 R0700A Remove this Part Identification Chart from the ManualPart Identification Chart-WESY74090 Page Page Remove this Part LIST/EXPLODED Drawing from the Manual 16 x 2 1/4 Bolt Upright Qty Description Key No. QtyX 3/4 Screw X 1/4 SpacerExploded Drawing-Model No. WESY74090