Weider WESY74090 user manual Before You Begin, Using the Weider Weight System

Page 4

Before You Begin

Thank you for selecting the versatile WEIDER

® 740

Department toll-free at 1-888-936-4266, Mon.–Fri., 8

Weight System. The 740 offers a selection of weight

 

a.m.–6:30 p.m. EST (excluding holidays). To help us

stations designed to develop every major muscle

 

assist you, please note the product model number and

group of the body. Whether your goal is to tone your

 

serial number before calling. The model number is

body, build dramatic muscle size and strength or

 

WESY74090. The serial number can be found on a

improve your cardiovascular system, the 740 w

ill help

decal attached to the WEIDER

® 740 Weight System

you to achieve the results you want.

 

(see the front cover of this manual).

 

For your benefit, read this manual carefully before

 

Please use the drawing below to familiarize your-

using the WEIDER

® 740 Weight System.

If you have

self with the major parts and how they fit together.

additional questions, please call our Customer Service

Pulley Station

 

Upright

 

Lat Bar

 

Butterfly/Press

Arm

 

Backrest

 

Foam Roller

 

Seat

 

Weight

 

Stack

 

Leg Lever

 

ASSEMBLED

DIMENSIONS:

Height:

75 in.

Width:

31 in.

Length:

44 in.

4

 

Image 4
Contents Model No. WESY74090 Serial No Serial Number DecalTable of Contents Limited WarrantyImportant Precautions Precautions before using the weight systemMake sure the cables remain on the pulleys Keep hands and feet away from moving partsUsing the Weider Weight System Before You BeginAssembly To make the assembly process as smooth as possiLocate and open the parts bag labeled Frame Assembly See the inset drawingBolts with two 5/16 Nylon Locknuts Tighten the Nylon Locknuts yetTighten all Nylon Locknuts used in steps 1 through SupportLocknut 3 do not tighten at this time Locate and open the parts bag labeled ARMMake sure the welded tab on the Press Frame Is oriented as shownArm Right Axle with a hammerShort Cable 58 is between the Pulley 15 Cable Trap is oriented as shown8 x 1 Bolt 59, a 3/8 Plain Nut 56 and a 3/8 Spacer15b Onto the Bolt to prevent the Pulley from falling off dur Ing the following steps. Note Make sure the PulleyFrom Pulley To Pulley BracketMake sure the Cable Trap is oriented as shown Bolt 12 and a 3/8 Nylon Locknut 21. NoteSpacer To the Seat 13 with two 1/4 x 3/4 Screws Cable Diagram Shooting and Maintenance onLong Cable 76, 87 1/2Cise will be reduced AdjustmentPin Trouble-shooting and Maintenance Make sure the Cable Trap is oriented as shown Re-install itWoven cable, the type of cable used on the home gym Additional slack can be removed by moving the upperWeight Resistance Chart Cables, pulleys, and weight guidesLbs 101 120 121 138 103Ordering Replacement Parts Part No J00885-C R0700ARemove this Part Identification Chart from the Manual WESY74090 R0700APart Identification Chart-WESY74090 Page Page Remove this Part LIST/EXPLODED Drawing from the Manual Qty Description Key No. Qty 16 x 2 1/4 Bolt UprightX 3/4 Screw X 1/4 SpacerExploded Drawing-Model No. WESY74090