Weider user manual Part Identification Chart-WESY74090

Page 22

Part Identification Chart—WESY74090	R0700A

1/4" Nylon Locknut (2)

1/4" x 2 1/4" Carriage Bolt (38)

5/16" Nylon Locknut (3)

1/4" x 1 3/4" Screw (52)

3/8" Nylon Jamnut (22)

1/4" x 2" Screw (24)

3/8" Nylon Locknut (21)

5/16" x 1 1/2" Bolt (11)

3/8" Plain Nut (56)

5/16" x 2" Bolt (78)

1/4" Flat Washer (10)

5/16" x 2 1/4" Bolt (1)

5/16" Flat Washer (8)

5/16" x 2 1/2" Bolt (14)

5/16" x 3 1/4" Bolt (33)

3/8" Flat Washer (9)

5/16" x 6" Bolt (7)

Image 22

Contents Model No. WESY74090 Serial No Serial Number DecalTable of Contents Limited WarrantyMake sure the cables remain on the pulleys Important PrecautionsPrecautions before using the weight system Keep hands and feet away from moving partsUsing the Weider Weight System Before You BeginAssembly To make the assembly process as smooth as possiBolts with two 5/16 Nylon Locknuts Locate and open the parts bag labeled Frame AssemblySee the inset drawing Tighten the Nylon Locknuts yetTighten all Nylon Locknuts used in steps 1 through SupportMake sure the welded tab on the Press Frame Locknut 3 do not tighten at this timeLocate and open the parts bag labeled ARM Is oriented as shownArm Right Axle with a hammerShort Cable 58 is between the Pulley 15 Cable Trap is oriented as shown8 x 1 Bolt 59, a 3/8 Plain Nut 56 and a 3/8 Spacer15b From Pulley To Pulley Onto the Bolt to prevent the Pulley from falling off durIng the following steps. Note Make sure the Pulley BracketMake sure the Cable Trap is oriented as shown Bolt 12 and a 3/8 Nylon Locknut 21. NoteSpacer To the Seat 13 with two 1/4 x 3/4 Screws Cable Diagram Shooting and Maintenance onLong Cable 76, 87 1/2Cise will be reduced AdjustmentPin Woven cable, the type of cable used on the home gym Trouble-shooting and MaintenanceMake sure the Cable Trap is oriented as shown Re-install it Additional slack can be removed by moving the upper Lbs Weight Resistance Chart Cables, pulleys, and weight guides 101 120 121 138 103Ordering Replacement Parts Part No J00885-C R0700ARemove this Part Identification Chart from the Manual WESY74090 R0700APart Identification Chart-WESY74090 Page Page Remove this Part LIST/EXPLODED Drawing from the Manual X 3/4 Screw Qty Description Key No. Qty16 x 2 1/4 Bolt Upright X 1/4 SpacerExploded Drawing-Model No. WESY74090