JVC LVT1306-007A Connecting video components, Scart connection, Scart Terminal Specifications

Connecting video components

SCART connection

You can enjoy pictures and sounds from playback components simply by connecting with the SCART cable.

•If your video components have digital output terminal, also connect them using the digital terminals explained in “Digital connection” (see page 11). By using these terminals, you can get better sound quality.

IMPORTANT:

Make the following adjustments correctly; otherwise, you cannot view the playback picture on the TV.

–DVD VIDEO INPUT and VCR VIDEO INPUT settings

–DOWN MIX setting

–Y/C SEPARATE setting

For details about each setting, see page 25.

DO NOT use a TV through a VCR or a TV with a built-in VCR; otherwise, the picture may be distorted.

Turn off all components before making connections.

•Illustrations of the input/output terminals are typical examples. When you connect other components, refer also to their manuals since the terminal names actually printed on the rear vary among different components.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

AV IN/OUT	TV
DVR/DVD	VCR

SCART cable (supplied: 1 cable)

NOTE

When the TV is equipped with multiple SCART terminals, refer to the TV manual to check the available video signals for each terminal, then connect the SCART cable correctly.

TV

VCR

DVD recorder or DVD player

SCART Terminal Specifications

			Terminal name
		TV	VCR	DVR/DVD
Audio	L/R	◯	◯	◯
Input	Composite	◯*1	◯*1	◯*1
		−
Video	S-video (Y/C)		◯*1	◯*1
	RGB	−	◯	◯
Audio	L/R	◯*2	◯	◯
Output	Composite	◯	◯	◯
			−	−
Video	S-video (Y/C)	◯
	RGB	◯	−	−
T-V LINK		◯*3	◯*3	◯*3

◯: Available, –: Not available

Any signal input from a SCART terminal cannot be output through the same SCART terminal.

*1 Composite video signals and S-video signals can be converted into each other. For details about the settings and the output of the signals, see page 25.

*2 Only when TV Direct is in use (see page 14).

*3 The signals for the T-V LINK function are always going through the receiver.

CONTINUED ON THE NEXT PAGE

7