JVC LVT1306-007A manual Audio/video connection, For an analogue decoder, For T-V Link

For an analogue decoder

To watch through or to record a scrambled program on your VCR, connect the analogue decoder to your VCR and select the scrambled channel on your VCR.

If there is not an appropriate terminal for the decoder connection on your VCR, connect the decoder to your TV.

Refer also to the manuals supplied with these components.

For T-V LINK

•You can use the T-V LINK function if you connect a T-V LINK compatible TV and VCR to this receiver with a fully wired SCART cables. For details on T-V LINK, refer also to the manuals supplied with the TV and the VCR.

•Connect a SCART cable to EXT-2 terminal on the JVC’s T-V LINK compatible TV for the T-V LINK function.

•Some video components support the data communication like T-V LINK. For complete details, refer also to the manuals supplied with these components.

Audio/video connection

In addition to the SCART terminals, this receiver is equipped with the following video terminals:

•Component video input/output: VIDEO IN, DVR/DVD IN, MONITOR OUT

•Composite and S-video input: VIDEO IN

IMPORTANT:

The component video signals from the COMPONENT jacks are transmitted only through the MONITOR OUT jacks.

Therefore, if the TV is connected to the receiver through the SCART terminal (TV) and a playing video component is connected to the receiver through the component video jacks (VIDEO IN or DVR/DVD IN), you cannot view the playback picture on the TV.

7Connecting a DVD recorder or DVD player to the DVR/DVD IN jacks

To fully enjoy Dolby Digital and DTS multi-channel software (including Dual Mono software), connect the DVD recorder or DVD player through the digital input terminals (see page 11).

When you connect a DVD recorder or DVD player with its stereo output jacks:

Turn off all components before making connections.

White

VIDEO

COMPONENT	VIDEO IN		AUDIO
				L
	S-VIDEO	VIDEO
DVR/DVD
IN				R
MONITOR		DVR/DVD	VIDEO	MONITOR
OUT		IN	IN	OUT

Y PBPR

Red

		Component video cable
Green	Red	(not supplied)
Blue

Stereo audio cable (not supplied)

ı

DVD recorder or DVD player

Å

ÅTo component video output

ıTo left/right audio channel output

NOTES

•Connect Y, PB, and PR correctly.

•Do not connect different components to the AUDIO DVR/DVD IN jacks and AV IN/OUT (SCART) DVR/DVD terminal (see page 7); otherwise, sounds from both components are come out of the speakers at the same time.

8