Miele W 149 operating instructions Programme, Interruption, Alteration, Skipping a programme stage

Page 20

How to wash correctly

Programme . . .

. . . interruption

^Press the "I-ON/0-OFF" button.

^To continue with the same programme press the "I-ON/0-OFF" button again.

. . . alteration

The machine will accept the following changes after the "START" button has been pressed:

–Selection of a different temperature, and/or selection or de-selection of the "Water plus" option can be car- ried out up to 6 minutes after programme start.

–The spin speed for final spin can be changed within the limits for the programme.

After start it is no longer possible to select a different programme.

If a different programme is selected or if another temperature is selected 6 min- utes after start, the "Finish" indicator light flashes. This does not affect programme sequence. The indicator light goes out when the programme se- lector is set back to the programme or temperature previously chosen.

To select a different programme pro- ceed as follows:

^Switch off the machine using the "I-ON/0-OFF" button.

^Turn the programme selector to "Fin- ish".

^Switch on the machine using the "I-ON/0-OFF" button.

^Select a new programme.

^Press the "START" button.

. . . skipping a programme stage

^Turn the programme selector to "Finish".

As soon as the programme sequence light starts flashing for the stage at which the programme should continue:

^Turn the programme selector to the appropriate programme within 4 sec- onds.

Programmes cannot be interrupted or altered if the programme lock has been activated.

20

Image 20

Contents Operating instructions for Washing machine W Disposal of your old appliance Caring for our environmentDisposal of the packing material Contents Contents Consumption data Technical data Guide to the machine General viewControl panel OverviewTechnical safety Correct usageUse Accessories Disposal of your old machineWashing environmentally and economically Before using for the first time Before washing ASort the laundry How to wash correctlyBrief guide Load the drum Maximum load weightsDOpen the drum EClose the drum GPull out the detergent dispenser drawer HAdd detergent KTurn the programme selector to the programme requiredNPress the Start button LSelect any additional option re- quiredMSelect a spin speed After washing At the end of a programmeRClose the drum SClose the inner lid and the ma- chine outer lidAdding or removing laundry after programme start General exceptionsProgramme InterruptionAlteration Skipping a programme stageAdding detergent It is important to dispense the correct amount, becauseWater Hardness Too little has the following resultsAdding detergent Water softeners Fabric conditioners, texturisers, liquid starchStarching separately Do not exceed the maximum level markAdding fabric conditioner or texturiser separately Programmes Programme selectionProgrammes Additional op TionsSequence ExplanationsLoad recognition WoolStarch Drain 40C Final spinTop-up rinse programmable Graduated rinsingProgrammes Ironing Important other care symbolsTumble dry Additional options SoakPre-wash ShortWater plus SpinSwitching on programme locking Switching off programme locking earlyTo check if programme locking is switched on Electronic programme lockingProgrammable functions Maximum water levelWater plus system OptionSelecting the programmable function Turn to nextSelecting the Options Activating the i compartment Silk 30 C ActivatingSelecting a different Soak time Soak timeWoollens Cold Storing the programmable function in memory Gentle actionMixed Wash 40 C Activating Top-up rinse for Cottons Starch ActivatingMemory function Activating the programmable func- tionCloth Cleaning and careCleaning the washing machine Cleaning the detergent dispenser drawer Extra cleaningCleaning the fluff drain filter and pump Place a dish under the drain spoutAfter cleaning Cleaning the filter in the water inlet Problem solving guide What to do, if Cause RemedyCheck inlet indica Programme butTor flashes and the laundry Was not washed One of the following indiIndicator light Indicator light FinIndicator lights Rinse hold Drain/Final spin flashesMachine shakes dur Ing the spin cycleLaundry has not been Spun satisfactorilyLarge residues of deter DrawerFabric conditioner is not Completely dispensed or tooTo check water pressure Opening the lid in the event of a power failureSwitch off the washing machine After sales service Programme update function PCAppliance guarantee Customer contactInstallation Installation surfaceLevelling and adjusting Please note the following pointsRemoving the transit fitting Re-fitting the transit fittingConnection to water supply Connection to the drainage system Drain hose connectionElectrical connection U.K Non-rewireable plugs BS Consumption data Programme Load Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00