Miele W 149 Check inlet indica, Programme but, Tor flashes and the laundry, Soak/Pre-wash, Rinses

Page 47

Problem solving guide

What to do, if . . .		Cause . . .	Remedy . . .

. . . the "Check inlet" indica-		The water inlet is restricted.	– The stopcock is not opened
tor flashes during the			far enough.
programme but the			– The inlet hose is kinked.
programme is running nor-			– The water pressure is too low
mally.			– The water pressure is too low
mally.			– The filter in the inlet hose is
			– The filter in the inlet hose is
			dirty. Clean it.
. . . the "Check inlet" indica-		The water inlet is closed.	– Open the stopcock.
tor flashes and the laundry			– Start the programme again.
was not washed.
. . . one of the following indi-		There is a fault.	– Press "I-ON/0-OFF" button to
cator lights is flashing			release it.
-	"Soak/Pre-wash"		– Turn the programme selector
-	"Main Wash"		to "Finish".
-	"Rinses"		– Press "I-ON/0-OFF" button in.
-	"Rinse hold"		– Press "I-ON/0-OFF" button in.
-	"Rinse hold"		– Re-start the programme.
			– Re-start the programme.
			– If the indicator light starts
			flashing again, call the Ser-
			vice Dept.

47

Image 47

Contents Operating instructions for Washing machine W Disposal of your old appliance Caring for our environmentDisposal of the packing material Contents Contents Consumption data Technical data General view Guide to the machineOverview Control panelCorrect usage Technical safetyUse Disposal of your old machine AccessoriesWashing environmentally and economically Before using for the first time Before washing ASort the laundry How to wash correctlyBrief guide Load the drum Maximum load weightsDOpen the drum EClose the drum KTurn the programme selector to the programme required GPull out the detergent dispenser drawer HAdd detergentNPress the Start button LSelect any additional option re- quiredMSelect a spin speed SClose the inner lid and the ma- chine outer lid After washingAt the end of a programme RClose the drumGeneral exceptions Adding or removing laundry after programme startSkipping a programme stage ProgrammeInterruption AlterationToo little has the following results Adding detergentIt is important to dispense the correct amount, because Water HardnessFabric conditioners, texturisers, liquid starch Adding detergent Water softenersStarching separately Do not exceed the maximum level markAdding fabric conditioner or texturiser separately Programme selection ProgrammesAdditional op Tions ProgrammesWool SequenceExplanations Load recognitionGraduated rinsing Starch Drain40C Final spin Top-up rinse programmableProgrammes Ironing Important other care symbolsTumble dry Short Additional optionsSoak Pre-washSpin Water plusElectronic programme locking Switching on programme lockingSwitching off programme locking early To check if programme locking is switched onMaximum water level Programmable functionsTurn to next Water plus systemOption Selecting the programmable functionSelecting the Options Silk 30 C Activating Activating the i compartmentSelecting a different Soak time Soak timeWoollens Cold Storing the programmable function in memory Gentle actionMixed Wash 40 C Activating Starch Activating Top-up rinse for CottonsActivating the programmable func- tion Memory functionCloth Cleaning and careCleaning the washing machine Extra cleaning Cleaning the detergent dispenser drawerPlace a dish under the drain spout Cleaning the fluff drain filter and pumpAfter cleaning Cleaning the filter in the water inlet What to do, if Cause Remedy Problem solving guideWas not washed One of the following indi Check inlet indicaProgramme but Tor flashes and the laundryDrain/Final spin flashes Indicator lightIndicator light Fin Indicator lights Rinse holdSpun satisfactorily Machine shakes durIng the spin cycle Laundry has not beenCompletely dispensed or too Large residues of deterDrawer Fabric conditioner is notTo check water pressure Opening the lid in the event of a power failureSwitch off the washing machine Customer contact After sales serviceProgramme update function PC Appliance guaranteePlease note the following points InstallationInstallation surface Levelling and adjustingRe-fitting the transit fitting Removing the transit fittingConnection to water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BS Programme Load Consumption data Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00