Miele W 149 operating instructions Water plus, Spin

Page 31

Additional options

Water plus

The water level increases in the "COTTONS", "MINIMUM IRON",

"QUICK WASH" and "MIXED WASH" programmes.

You can choose between four options for the "Water plus" button.

The options are explained in "Water plus system" in the "Programmable functions" section.

Switching off the additional options

If an additional option is switched on, the indicator light next to the corre- sponding button is lit up. The option can be switched off by pressing the button again. The indicator light goes out.

Spin

A final spin is carried out at the end of each of the basic programmes, if a spin speed has been selected.

"Without final spin"

Interim rinse and spin is carried out during the programme cycle.

Laundry is not spun after the final rinse. After water has been drained the ma- chine switches automatically to "Finish".

"Rinse hold"

Interim rinse and spin is carried out during the programme cycle.

The laundry remains suspended in wa- ter after the final rinse.

This helps to reduce the possibility of creasing if the washing is left for some time before being taken out of the ma- chine.

To continue the programme with a spin:

Use the "Spin" button to select the re- quired spin speed.

The maximum spin speed is automati- cally limited according to the basic wash programme chosen. (See "Programme selection" chart).

To continue the programme without spinning:

Press the "Lid" button. The water will then drain out of the machine. Once it has drained out press the "Lid" button again and open the drum.

31

Image 31
Contents Operating instructions for Washing machine W Disposal of the packing material Caring for our environmentDisposal of your old appliance Contents Contents Consumption data Technical data General view Guide to the machineOverview Control panelCorrect usage Technical safetyUse Disposal of your old machine AccessoriesWashing environmentally and economically Before using for the first time Brief guide How to wash correctlyBefore washing ASort the laundry DOpen the drum Maximum load weightsLoad the drum EClose the drum KTurn the programme selector to the programme required GPull out the detergent dispenser drawer HAdd detergentMSelect a spin speed LSelect any additional option re- quiredNPress the Start button SClose the inner lid and the ma- chine outer lid After washingAt the end of a programme RClose the drumGeneral exceptions Adding or removing laundry after programme startSkipping a programme stage ProgrammeInterruption AlterationToo little has the following results Adding detergentIt is important to dispense the correct amount, because Water HardnessFabric conditioners, texturisers, liquid starch Adding detergent Water softenersAdding fabric conditioner or texturiser separately Do not exceed the maximum level markStarching separately Programme selection ProgrammesAdditional op Tions ProgrammesWool SequenceExplanations Load recognitionGraduated rinsing Starch Drain40C Final spin Top-up rinse programmableProgrammes Tumble dry Important other care symbolsIroning Short Additional optionsSoak Pre-washSpin Water plusElectronic programme locking Switching on programme lockingSwitching off programme locking early To check if programme locking is switched onMaximum water level Programmable functionsTurn to next Water plus systemOption Selecting the programmable functionSelecting the Options Silk 30 C Activating Activating the i compartmentWoollens Cold Soak timeSelecting a different Soak time Mixed Wash 40 C Activating Gentle actionStoring the programmable function in memory Starch Activating Top-up rinse for CottonsActivating the programmable func- tion Memory functionCleaning the washing machine Cleaning and careCloth Extra cleaning Cleaning the detergent dispenser drawerPlace a dish under the drain spout Cleaning the fluff drain filter and pumpAfter cleaning Cleaning the filter in the water inlet What to do, if Cause Remedy Problem solving guideWas not washed One of the following indi Check inlet indicaProgramme but Tor flashes and the laundryDrain/Final spin flashes Indicator lightIndicator light Fin Indicator lights Rinse holdSpun satisfactorily Machine shakes durIng the spin cycle Laundry has not beenCompletely dispensed or too Large residues of deterDrawer Fabric conditioner is notSwitch off the washing machine Opening the lid in the event of a power failureTo check water pressure Customer contact After sales serviceProgramme update function PC Appliance guaranteePlease note the following points InstallationInstallation surface Levelling and adjustingRe-fitting the transit fitting Removing the transit fittingConnection to water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BS Programme Load Consumption data Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00