Miele W 149 operating instructions Non-rewireable plugs BS

Page 58

Installation

Non-rewireable plugs BS 1363

If this machine is fitted with a non-rewireable plug, the following infor- mation applies:

If the socket outlets are not suitable for the plug supplied with the product, it must be cut off and an appropriate plug fitted. The fuse carrier and fuse should be removed from the old plug and dis- posed of.

The plug cut from the flexible cord should then be disposed of and on no account be inserted into any socket elsewhere in the house (electric shock hazard).

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is em- bossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA ap- proved to BS 1362 and have the cor- rect rating. Replacement fuse covers may be purchased from your local elec- trical supplier or Service agent.

58

Image 58

Contents Operating instructions for Washing machine W Disposal of the packing material Caring for our environmentDisposal of your old appliance Contents Contents Consumption data Technical data Guide to the machine General viewControl panel OverviewTechnical safety Correct usageUse Accessories Disposal of your old machineWashing environmentally and economically Before using for the first time Brief guide How to wash correctlyBefore washing ASort the laundry DOpen the drum Maximum load weightsLoad the drum EClose the drum GPull out the detergent dispenser drawer HAdd detergent KTurn the programme selector to the programme requiredMSelect a spin speed LSelect any additional option re- quiredNPress the Start button RClose the drum After washingAt the end of a programme SClose the inner lid and the ma- chine outer lidAdding or removing laundry after programme start General exceptionsAlteration ProgrammeInterruption Skipping a programme stageWater Hardness Adding detergentIt is important to dispense the correct amount, because Too little has the following resultsAdding detergent Water softeners Fabric conditioners, texturisers, liquid starchAdding fabric conditioner or texturiser separately Do not exceed the maximum level markStarching separately Programmes Programme selectionProgrammes Additional op TionsLoad recognition SequenceExplanations WoolTop-up rinse programmable Starch Drain40C Final spin Graduated rinsingProgrammes Tumble dry Important other care symbolsIroning Pre-wash Additional optionsSoak ShortWater plus SpinTo check if programme locking is switched on Switching on programme lockingSwitching off programme locking early Electronic programme lockingProgrammable functions Maximum water levelSelecting the programmable function Water plus systemOption Turn to nextSelecting the Options Activating the i compartment Silk 30 C ActivatingWoollens Cold Soak timeSelecting a different Soak time Mixed Wash 40 C Activating Gentle actionStoring the programmable function in memory Top-up rinse for Cottons Starch ActivatingMemory function Activating the programmable func- tionCleaning the washing machine Cleaning and careCloth Cleaning the detergent dispenser drawer Extra cleaningCleaning the fluff drain filter and pump Place a dish under the drain spoutAfter cleaning Cleaning the filter in the water inlet Problem solving guide What to do, if Cause RemedyTor flashes and the laundry Check inlet indicaProgramme but Was not washed One of the following indiIndicator lights Rinse hold Indicator lightIndicator light Fin Drain/Final spin flashesLaundry has not been Machine shakes durIng the spin cycle Spun satisfactorilyFabric conditioner is not Large residues of deterDrawer Completely dispensed or tooSwitch off the washing machine Opening the lid in the event of a power failureTo check water pressure Appliance guarantee After sales serviceProgramme update function PC Customer contactLevelling and adjusting InstallationInstallation surface Please note the following pointsRemoving the transit fitting Re-fitting the transit fittingConnection to water supply Connection to the drainage system Drain hose connectionElectrical connection U.K Non-rewireable plugs BS Consumption data Programme Load Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00