Programmable functions
Activating the i compartment
This function should be activated if traditional "big box" detergents are used. For the first 10 seconds of the main wash cycle water flows in through compartment i.
Compartment j may sometimes not be able to hold the total amount of de- tergent required when:
-the water is very hard (over 3.8 mmol/l, water hardness level IV) and
-the washing is heavily soiled.
In this case compartment i can be used to flush in the extra detergent for the main wash.
Before the "Activating the i compart- ment" programmable function can be selected you must first select program- ming mode.
Selecting programming mode
AThe machine must be switched off and the drum door closed. The programme selector must point to "Finish".
BPress the additional option buttons "Short" and "Water plus" at the same time and hold pressed in and:
C. . . switch the machine on with the
DLet go of all these buttons.
The indicator light "Main wash" flashes in the sequence display.
Selecting the programmable function
To select the "Activating the i com- partment" programmable function turn the programme selector to
-Silk 30 °C ***.
Activating
To activate "Activating the i compart- ment" press the "START" button once. The "Rinses" light comes on in the se- quence display.
Storing in memory
To store the "Activating the i compart- ment" programmable function in the memory SWITCH the machine OFF with the
The "Activating the i compartment" programmable function is now stored in the machine’s memory.
Deactivating
To deactivate the use of Compartment
irepeat the procedure given above from point A as far as the *** shown above. Press the START button and the "Rinses" indicator light will go out. The function is deactivated. Store in mem- ory by pressing the
36