Miele W 149 operating instructions Sequence, Explanations, Load recognition, Wool

Page 26

Programmes

Sequence

		COTTONS1)	MINIMUM	DELICATES	Silk	WOOL-
			IRON1)			LENS
						/
Soak		optional	optional	optional	-	-
Pre-wash		optional	optional	optional	-	-
Main wash		ß	ß	ß	ß	ß
Top-up rinse from 75°C		pro-	-	-	-	-
		grammable
Graduated rinsing		-	from 40°C	-	-	-
No. of rinses		3 or 42)
- normal		3 or 42)	3	3	2	2
- part load		2	2	-	2	-
- short		2	2	3	2	-
Rinse and interim spin (rpm)		max. 1000	max. 500	-	-	max. 600
Final spin (rpm)		max. 1200	max. 900	max. 600	max. 400	max. 1200
Rinse hold		optional	optional	optional	optional	optional
Without final spin		optional	optional	optional	optional	optional
Wash rhythm		normal	normal	gentle	Silk	Wool
				action
Water level -	Wash	low	low	high	medium	medium
-	Rinse	low	medium	high	medium	medium

Explanations:

ßProgramme section included

- Programme section not included

1)Load recognition:

The programme sequence is modified in these programmes according to the absorbency of the load.

2)A 4th rinse automatically switches in if there is too much foam in the drum, or if a spin speed lower than 700 rpm has been selected.

Silk:

In this programme to achieve the best washing results, the washing action is lower than in the DELICATES programme but higher than in the WOOLLENS programme.

Wool:

Wool is susceptible to damage from movement when it is wet. The wash action during the course of the programme is low.

26

Image 26

Contents Operating instructions for Washing machine W Disposal of your old appliance Caring for our environmentDisposal of the packing material Contents Contents Consumption data Technical data Guide to the machine General viewControl panel OverviewTechnical safety Correct usageUse Accessories Disposal of your old machineWashing environmentally and economically Before using for the first time Before washing ASort the laundry How to wash correctlyBrief guide Load the drum Maximum load weightsDOpen the drum EClose the drum GPull out the detergent dispenser drawer HAdd detergent KTurn the programme selector to the programme requiredNPress the Start button LSelect any additional option re- quiredMSelect a spin speed RClose the drum After washingAt the end of a programme SClose the inner lid and the ma- chine outer lidAdding or removing laundry after programme start General exceptionsAlteration ProgrammeInterruption Skipping a programme stageWater Hardness Adding detergentIt is important to dispense the correct amount, because Too little has the following resultsAdding detergent Water softeners Fabric conditioners, texturisers, liquid starchStarching separately Do not exceed the maximum level markAdding fabric conditioner or texturiser separately Programmes Programme selectionProgrammes Additional op TionsLoad recognition SequenceExplanations WoolTop-up rinse programmable Starch Drain40C Final spin Graduated rinsingProgrammes Ironing Important other care symbolsTumble dry Pre-wash Additional optionsSoak ShortWater plus SpinTo check if programme locking is switched on Switching on programme lockingSwitching off programme locking early Electronic programme lockingProgrammable functions Maximum water levelSelecting the programmable function Water plus systemOption Turn to nextSelecting the Options Activating the i compartment Silk 30 C ActivatingSelecting a different Soak time Soak timeWoollens Cold Storing the programmable function in memory Gentle actionMixed Wash 40 C Activating Top-up rinse for Cottons Starch ActivatingMemory function Activating the programmable func- tionCloth Cleaning and careCleaning the washing machine Cleaning the detergent dispenser drawer Extra cleaningCleaning the fluff drain filter and pump Place a dish under the drain spoutAfter cleaning Cleaning the filter in the water inlet Problem solving guide What to do, if Cause RemedyTor flashes and the laundry Check inlet indicaProgramme but Was not washed One of the following indiIndicator lights Rinse hold Indicator lightIndicator light Fin Drain/Final spin flashesLaundry has not been Machine shakes durIng the spin cycle Spun satisfactorilyFabric conditioner is not Large residues of deterDrawer Completely dispensed or tooTo check water pressure Opening the lid in the event of a power failureSwitch off the washing machine Appliance guarantee After sales serviceProgramme update function PC Customer contactLevelling and adjusting InstallationInstallation surface Please note the following pointsRemoving the transit fitting Re-fitting the transit fittingConnection to water supply Connection to the drainage system Drain hose connectionElectrical connection U.K Non-rewireable plugs BS Consumption data Programme Load Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00