Miele W 149 operating instructions Top-up rinse for Cottons, Starch Activating

Page 39

Programmable functions

Top-up rinse for Cottons

At the end of the main wash addi- tional water flows into the drum and the suds are cooled down.

Hot suds can damage plastic drainage pipes.

Top-up rinse takes place when temper- atures of 95°C and 75°C are selected.

Top-up rinse should be activated:

–to prevent the danger of scalding if the drain hose is hooked over the edge of a sink or basin.

–where the drainage pipes do not comply with DIN 1986.

The washing machine is delivered with the Top-up rinse for Cottons deacti- vated.

Before the "Top-up rinse for Cottons" programmable function can be se- lected you must first select program- ming mode.

Selecting programming mode

AThe machine must be switched off and the drum door closed. The programme selector must point to "Finish".

BPress the additional option buttons "Short" and "Water plus" at the same time and hold pressed in and:

C. . . switch the machine on with the "I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes in the sequence display.

Selecting the programmable function

To select the "Top-up rinse for Cottons" programmable function turn the programme selector to -

Starch ***.

Activating

To activate "Top-up rinse for Cottons" press the "START" button once.

The "Rinses" light comes on in the se- quence display.

Storing in memory

To store the "Top-up rinse for Cottons" programmable function in the memory SWITCH the machine OFF with the "I-ON/0-OFF" button.

The "Top-up rinse for Cottons" program- mable function is now stored in the ma- chine’s memory.

Deactivating

If the "Top-up rinse for Cottons" pro- grammable function is no longer re- quired it can be deactivated. To do so repeat the procedure given above from point A as far as the *** shown above. Press the START button and the "Rinses" indicator light will go out. The function is now deactivated. Store in memory by pressing the "I-ON/0-OFF" button.

39

Image 39

Contents Operating instructions for Washing machine W Caring for our environment Disposal of the packing materialDisposal of your old appliance Contents Contents Consumption data Technical data General view Guide to the machineOverview Control panelCorrect usage Technical safetyUse Disposal of your old machine AccessoriesWashing environmentally and economically Before using for the first time How to wash correctly Brief guideBefore washing ASort the laundry Maximum load weights DOpen the drumLoad the drum EClose the drum KTurn the programme selector to the programme required GPull out the detergent dispenser drawer HAdd detergentLSelect any additional option re- quired MSelect a spin speedNPress the Start button SClose the inner lid and the ma- chine outer lid After washingAt the end of a programme RClose the drumGeneral exceptions Adding or removing laundry after programme startSkipping a programme stage ProgrammeInterruption AlterationToo little has the following results Adding detergentIt is important to dispense the correct amount, because Water HardnessFabric conditioners, texturisers, liquid starch Adding detergent Water softenersDo not exceed the maximum level mark Adding fabric conditioner or texturiser separatelyStarching separately Programme selection ProgrammesAdditional op Tions ProgrammesWool SequenceExplanations Load recognitionGraduated rinsing Starch Drain40C Final spin Top-up rinse programmableProgrammes Important other care symbols Tumble dryIroning Short Additional optionsSoak Pre-washSpin Water plusElectronic programme locking Switching on programme lockingSwitching off programme locking early To check if programme locking is switched onMaximum water level Programmable functionsTurn to next Water plus systemOption Selecting the programmable functionSelecting the Options Silk 30 C Activating Activating the i compartmentSoak time Woollens ColdSelecting a different Soak time Gentle action Mixed Wash 40 C ActivatingStoring the programmable function in memory Starch Activating Top-up rinse for CottonsActivating the programmable func- tion Memory functionCleaning and care Cleaning the washing machineCloth Extra cleaning Cleaning the detergent dispenser drawerPlace a dish under the drain spout Cleaning the fluff drain filter and pumpAfter cleaning Cleaning the filter in the water inlet What to do, if Cause Remedy Problem solving guideWas not washed One of the following indi Check inlet indicaProgramme but Tor flashes and the laundryDrain/Final spin flashes Indicator lightIndicator light Fin Indicator lights Rinse holdSpun satisfactorily Machine shakes durIng the spin cycle Laundry has not beenCompletely dispensed or too Large residues of deterDrawer Fabric conditioner is notOpening the lid in the event of a power failure Switch off the washing machineTo check water pressure Customer contact After sales serviceProgramme update function PC Appliance guaranteePlease note the following points InstallationInstallation surface Levelling and adjustingRe-fitting the transit fitting Removing the transit fittingConnection to water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BS Programme Load Consumption data Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00