Miele W 149 operating instructions Electrical connection U.K

Page 57

Installation

Electrical connection U.K.

All electrical work should be carried out only by a suitably qualified and compe- tent person, in strict accordance with national and local safety regulations.

The appliance is supplied with a mains cable with moulded plug for connection to a 230-240V mains supply. The volt- age, rated load and fuse rating are given on the data plate. Please ensure these match the household mains sup- ply.

Connection should be made via a fused plug and suitable switched socket which is easily accessible after installa- tion. For extra safety it is advisable to install a residual current device (RCD), with a trip current of 30 mA (in accor- dance with DIN VDE 0664, VDE 0100, Section 739). Do not connect via an ex- tension lead.

Important

The wires in the mains lead are col- oured in accordance with the following code:

Green/yellow	= earth
Blue	= neutral
Brown	= live

Where it is necessary to change plugs, if the colours of the wires in the mains lead of this appliance do not corre- spond with the coloured markings iden- tifying the terminals of your plug, pro- ceed as follows:

The wire which is coloured green and yellow must be connected to the termi- nal in the plug which is marked with the letter E or by the earth symbol z or coloured green, or green and yellow.

The wire which is coloured blue must be connected to the terminal in the plug which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal in the plug which is marked with the letter L or coloured red.

WARNING: THIS APPLIANCE MUST BE EARTHED

Ensure power is not supplied to the ap- pliance while installation work is being carried out.

57

Image 57

Contents Operating instructions for Washing machine W Caring for our environment Disposal of the packing materialDisposal of your old appliance Contents Contents Consumption data Technical data General view Guide to the machineOverview Control panelCorrect usage Technical safetyUse Disposal of your old machine AccessoriesWashing environmentally and economically Before using for the first time How to wash correctly Brief guideBefore washing ASort the laundry Maximum load weights DOpen the drumLoad the drum EClose the drum KTurn the programme selector to the programme required GPull out the detergent dispenser drawer HAdd detergentLSelect any additional option re- quired MSelect a spin speedNPress the Start button At the end of a programme After washingRClose the drum SClose the inner lid and the ma- chine outer lidGeneral exceptions Adding or removing laundry after programme startInterruption ProgrammeAlteration Skipping a programme stageIt is important to dispense the correct amount, because Adding detergentWater Hardness Too little has the following resultsFabric conditioners, texturisers, liquid starch Adding detergent Water softenersDo not exceed the maximum level mark Adding fabric conditioner or texturiser separatelyStarching separately Programme selection ProgrammesAdditional op Tions ProgrammesExplanations SequenceLoad recognition Wool40C Final spin Starch DrainTop-up rinse programmable Graduated rinsingProgrammes Important other care symbols Tumble dryIroning Soak Additional optionsPre-wash ShortSpin Water plusSwitching off programme locking early Switching on programme lockingTo check if programme locking is switched on Electronic programme lockingMaximum water level Programmable functionsOption Water plus systemSelecting the programmable function Turn to nextSelecting the Options Silk 30 C Activating Activating the i compartmentSoak time Woollens ColdSelecting a different Soak time Gentle action Mixed Wash 40 C ActivatingStoring the programmable function in memory Starch Activating Top-up rinse for CottonsActivating the programmable func- tion Memory functionCleaning and care Cleaning the washing machineCloth Extra cleaning Cleaning the detergent dispenser drawerPlace a dish under the drain spout Cleaning the fluff drain filter and pumpAfter cleaning Cleaning the filter in the water inlet What to do, if Cause Remedy Problem solving guideProgramme but Check inlet indicaTor flashes and the laundry Was not washed One of the following indiIndicator light Fin Indicator lightIndicator lights Rinse hold Drain/Final spin flashesIng the spin cycle Machine shakes durLaundry has not been Spun satisfactorilyDrawer Large residues of deterFabric conditioner is not Completely dispensed or tooOpening the lid in the event of a power failure Switch off the washing machineTo check water pressure Programme update function PC After sales serviceAppliance guarantee Customer contactInstallation surface InstallationLevelling and adjusting Please note the following pointsRe-fitting the transit fitting Removing the transit fittingConnection to water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BS Programme Load Consumption data Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00