Miele Customize Soak Times for Your Washer – Novotronic Models

Page 37

Programmable functions

Soak time

This is accessed for a programme by pressing the SOAK button on the fa- cia.

You can programme a soak time of:

-2 hours (factory setting) or

-1 hour 30 mins or

-1 hour or

-30 mins.

A "Soak time" of 2 hours is set at the factory. If you wish to change this stan- dard setting to one of the times listed above, you must first select program- ming mode.

Selecting programming mode

AThe machine must be switched off and the drum door closed. The programme selector must point to "Finish".

BPress the additional option buttons "Short" and "Water plus" at the same time and hold pressed in and:

C. . . switch the machine on with the "I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes in the sequence display.

Selecting the programmable function

To select the "Soak time" programmable function turn the programme selector to

-WOOLLENS Cold.

The "Rinse" indicator light comes on in the sequence display. This shows that a "Soak time" of 2 hours is currently se- lected (factory setting).

Selecting a different "Soak time"

By pressing the "START" button a vari- ous number of times you can select dif- ferent soak times. To confirm that a dif- ferent soak time has been selected, the previous indicator light goes out and a new indicator light comes on.

Each time "START" is pressed a differ- ent indicator light will come on. The in- dicator lights correspond to the 4 soak times available as follows:

2 hours =

"Rinse"

1 hour 30 mins = "Rinse hold"

1 hour =

"Drain / Final spin"

30 mins =

"Finish"

Storing in memory

When you have selected the soak time you require, SWITCH the machine OFF with the "I-ON/0-OFF" button.

The "Soak time" you have selected is now stored in the machine’s memory.

37

Image 37
Contents Operating instructions for Washing machine W Disposal of the packing material Caring for our environmentDisposal of your old appliance Contents Contents Consumption data Technical data General view Guide to the machineOverview Control panelCorrect usage Technical safetyUse Disposal of your old machine AccessoriesWashing environmentally and economically Before using for the first time Brief guide How to wash correctlyBefore washing ASort the laundry DOpen the drum Maximum load weightsLoad the drum EClose the drum KTurn the programme selector to the programme required GPull out the detergent dispenser drawer HAdd detergentMSelect a spin speed LSelect any additional option re- quiredNPress the Start button At the end of a programme After washingRClose the drum SClose the inner lid and the ma- chine outer lidGeneral exceptions Adding or removing laundry after programme startInterruption ProgrammeAlteration Skipping a programme stageIt is important to dispense the correct amount, because Adding detergentWater Hardness Too little has the following resultsFabric conditioners, texturisers, liquid starch Adding detergent Water softenersAdding fabric conditioner or texturiser separately Do not exceed the maximum level markStarching separately Programme selection ProgrammesAdditional op Tions ProgrammesExplanations SequenceLoad recognition Wool40C Final spin Starch DrainTop-up rinse programmable Graduated rinsingProgrammes Tumble dry Important other care symbolsIroning Soak Additional optionsPre-wash ShortSpin Water plusSwitching off programme locking early Switching on programme lockingTo check if programme locking is switched on Electronic programme lockingMaximum water level Programmable functionsOption Water plus systemSelecting the programmable function Turn to nextSelecting the Options Silk 30 C Activating Activating the i compartmentWoollens Cold Soak timeSelecting a different Soak time Mixed Wash 40 C Activating Gentle actionStoring the programmable function in memory Starch Activating Top-up rinse for CottonsActivating the programmable func- tion Memory functionCleaning the washing machine Cleaning and careCloth Extra cleaning Cleaning the detergent dispenser drawerPlace a dish under the drain spout Cleaning the fluff drain filter and pumpAfter cleaning Cleaning the filter in the water inlet What to do, if Cause Remedy Problem solving guideProgramme but Check inlet indicaTor flashes and the laundry Was not washed One of the following indiIndicator light Fin Indicator lightIndicator lights Rinse hold Drain/Final spin flashesIng the spin cycle Machine shakes durLaundry has not been Spun satisfactorilyDrawer Large residues of deterFabric conditioner is not Completely dispensed or tooSwitch off the washing machine Opening the lid in the event of a power failureTo check water pressure Programme update function PC After sales serviceAppliance guarantee Customer contactInstallation surface InstallationLevelling and adjusting Please note the following pointsRe-fitting the transit fitting Removing the transit fittingConnection to water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BS Programme Load Consumption data Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00