Miele W 149 operating instructions Programmable functions, Maximum water level

Page 33

Programmable functions

Maximum water level

Selecting the programmable function

The water level for rinsing is automat- ically raised to the maximum level where rinse results are particularly important.

It is effective for the rinses in the follow- ing programmes:

-COTTONS

-MINIMUM IRON

-QUICK WASH

-MIXED WASH - Poly/Cottons

Before the "Maximum water level" pro- grammable function can be selected you must first select programming mode.

Selecting programming mode

AThe machine must be switched off and the drum door closed. The programme selector must point to "Finish".

BPress the additional option buttons "Short" and "Water plus" at the same time and hold pressed in and:

C. . . switch the machine on with the "I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes in the sequence display.

To select the "Maximum water level" programmable function: turn the programme selector to - DELICATES 40 °C ***.

Activating

To activate "Maximum water level" press the "START" button once.

The "Rinses" light comes on in the se- quence display.

Storing in memory

To store the "Maximum water level" pro- grammable function in the memory SWITCH the machine OFF with the "I-ON/0-OFF" button.

The "Maximum water level" programma- ble function is now stored in the ma- chine’s memory and is effective in the programmes described above until such time as you may wish to deacti- vate it.

Deactivating

To deactivate the use of a maximum water level in the rinses repeat the pro- cedure given above from point A as far as the *** shown above. Press the START button and the "Rinses" indicator light will go out. The function is now de- activated. Store in memory by pressing the "I-ON/0-OFF" button.

33

Image 33
Contents Operating instructions for Washing machine W Caring for our environment Disposal of the packing materialDisposal of your old appliance Contents Contents Consumption data Technical data General view Guide to the machineOverview Control panelCorrect usage Technical safetyUse Disposal of your old machine AccessoriesWashing environmentally and economically Before using for the first time How to wash correctly Brief guideBefore washing ASort the laundry Maximum load weights DOpen the drumLoad the drum EClose the drum KTurn the programme selector to the programme required GPull out the detergent dispenser drawer HAdd detergentLSelect any additional option re- quired MSelect a spin speedNPress the Start button At the end of a programme After washingRClose the drum SClose the inner lid and the ma- chine outer lidGeneral exceptions Adding or removing laundry after programme startInterruption ProgrammeAlteration Skipping a programme stageIt is important to dispense the correct amount, because Adding detergentWater Hardness Too little has the following resultsFabric conditioners, texturisers, liquid starch Adding detergent Water softenersDo not exceed the maximum level mark Adding fabric conditioner or texturiser separatelyStarching separately Programme selection ProgrammesAdditional op Tions ProgrammesExplanations SequenceLoad recognition Wool40C Final spin Starch DrainTop-up rinse programmable Graduated rinsingProgrammes Important other care symbols Tumble dryIroning Soak Additional optionsPre-wash ShortSpin Water plusSwitching off programme locking early Switching on programme lockingTo check if programme locking is switched on Electronic programme lockingMaximum water level Programmable functionsOption Water plus systemSelecting the programmable function Turn to nextSelecting the Options Silk 30 C Activating Activating the i compartmentSoak time Woollens ColdSelecting a different Soak time Gentle action Mixed Wash 40 C ActivatingStoring the programmable function in memory Starch Activating Top-up rinse for CottonsActivating the programmable func- tion Memory functionCleaning and care Cleaning the washing machineCloth Extra cleaning Cleaning the detergent dispenser drawerPlace a dish under the drain spout Cleaning the fluff drain filter and pumpAfter cleaning Cleaning the filter in the water inlet What to do, if Cause Remedy Problem solving guideProgramme but Check inlet indicaTor flashes and the laundry Was not washed One of the following indiIndicator light Fin Indicator lightIndicator lights Rinse hold Drain/Final spin flashesIng the spin cycle Machine shakes durLaundry has not been Spun satisfactorilyDrawer Large residues of deterFabric conditioner is not Completely dispensed or tooOpening the lid in the event of a power failure Switch off the washing machineTo check water pressure Programme update function PC After sales serviceAppliance guarantee Customer contactInstallation surface InstallationLevelling and adjusting Please note the following pointsRe-fitting the transit fitting Removing the transit fittingConnection to water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BS Programme Load Consumption data Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00