Miele W 149 operating instructions Memory function, Activating the programmable func- tion

Page 40

Programmable functions

Memory function

If an additional option is selected for a programme, and / or the spin speed is altered, the machine stores these changes in memory at the start of a programme.

The memory function is not active when the machine is first delivered but can be programmed to active.

Activating

First select programming mode.

Selecting programming mode

AThe machine must be switched off and the drum door closed. The programme selector must point to "Finish".

BPress the additional option buttons "Short" and "Water plus" at the same time and hold pressed in and:

C. . . switch the machine on with the "I-ON/0-OFF" button.

DLet go of all these buttons.

The indicator light "Main wash" flashes in the sequence display.

Activating the programmable func- tion

To activate the "Memory" programmable function turn the programme selector to Separate rinse ***.

To activate the "Memory" function press the START button once. The rinses light comes on in the Sequence display.

Storing in memory

To store this setting in memory SWITCH the machine OFF with the "I-ON/0-OFF" button.

Deactivating

To deactivate the memory function re- peat the procedure given above from point A as far as the *** shown above. Press the "START" button and the "Rinses" indicator light will go out. The function is now deactivated. Store in memory by pressing the "I-ON/0-OFF" button.

40

Image 40

Contents Operating instructions for Washing machine W Disposal of the packing material Caring for our environmentDisposal of your old appliance Contents Contents Consumption data Technical data Guide to the machine General viewControl panel OverviewTechnical safety Correct usageUse Accessories Disposal of your old machineWashing environmentally and economically Before using for the first time Brief guide How to wash correctlyBefore washing ASort the laundry DOpen the drum Maximum load weightsLoad the drum EClose the drum GPull out the detergent dispenser drawer HAdd detergent KTurn the programme selector to the programme requiredMSelect a spin speed LSelect any additional option re- quiredNPress the Start button After washing At the end of a programmeRClose the drum SClose the inner lid and the ma- chine outer lidAdding or removing laundry after programme start General exceptionsProgramme InterruptionAlteration Skipping a programme stageAdding detergent It is important to dispense the correct amount, becauseWater Hardness Too little has the following resultsAdding detergent Water softeners Fabric conditioners, texturisers, liquid starchAdding fabric conditioner or texturiser separately Do not exceed the maximum level markStarching separately Programmes Programme selectionProgrammes Additional op TionsSequence ExplanationsLoad recognition WoolStarch Drain 40C Final spinTop-up rinse programmable Graduated rinsingProgrammes Tumble dry Important other care symbolsIroning Additional options SoakPre-wash ShortWater plus SpinSwitching on programme locking Switching off programme locking earlyTo check if programme locking is switched on Electronic programme lockingProgrammable functions Maximum water levelWater plus system OptionSelecting the programmable function Turn to nextSelecting the Options Activating the i compartment Silk 30 C ActivatingWoollens Cold Soak timeSelecting a different Soak time Mixed Wash 40 C Activating Gentle actionStoring the programmable function in memory Top-up rinse for Cottons Starch ActivatingMemory function Activating the programmable func- tionCleaning the washing machine Cleaning and careCloth Cleaning the detergent dispenser drawer Extra cleaningCleaning the fluff drain filter and pump Place a dish under the drain spoutAfter cleaning Cleaning the filter in the water inlet Problem solving guide What to do, if Cause RemedyCheck inlet indica Programme butTor flashes and the laundry Was not washed One of the following indiIndicator light Indicator light FinIndicator lights Rinse hold Drain/Final spin flashesMachine shakes dur Ing the spin cycleLaundry has not been Spun satisfactorilyLarge residues of deter DrawerFabric conditioner is not Completely dispensed or tooSwitch off the washing machine Opening the lid in the event of a power failureTo check water pressure After sales service Programme update function PCAppliance guarantee Customer contactInstallation Installation surfaceLevelling and adjusting Please note the following pointsRemoving the transit fitting Re-fitting the transit fittingConnection to water supply Connection to the drainage system Drain hose connectionElectrical connection U.K Non-rewireable plugs BS Consumption data Programme Load Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00