Miele W 149 operating instructions Removing the transit fitting, Re-fitting the transit fitting

Page 54

Installation

Removing the transit fitting

^Unscrew the 4 outer screws marked A completely.

^Unscrew the 4 screws marked B. These screws must then be left on the transit bars.

^Plug the 4 large holes with the caps supplied.

The transit fitting together with screws should be stored in a safe place for future use. It must be re-fit- ted if the machine is to be moved again.

Re-fitting the transit fitting

To refit the transit fitting reverse the pro- cedure described above.

^Remove the transit bars.

54

Image 54

Contents Operating instructions for Washing machine W Caring for our environment Disposal of the packing materialDisposal of your old appliance Contents Contents Consumption data Technical data Guide to the machine General viewControl panel OverviewTechnical safety Correct usageUse Accessories Disposal of your old machineWashing environmentally and economically Before using for the first time How to wash correctly Brief guideBefore washing ASort the laundry Maximum load weights DOpen the drumLoad the drum EClose the drum GPull out the detergent dispenser drawer HAdd detergent KTurn the programme selector to the programme requiredLSelect any additional option re- quired MSelect a spin speedNPress the Start button RClose the drum After washingAt the end of a programme SClose the inner lid and the ma- chine outer lidAdding or removing laundry after programme start General exceptionsAlteration ProgrammeInterruption Skipping a programme stageWater Hardness Adding detergentIt is important to dispense the correct amount, because Too little has the following resultsAdding detergent Water softeners Fabric conditioners, texturisers, liquid starchDo not exceed the maximum level mark Adding fabric conditioner or texturiser separatelyStarching separately Programmes Programme selectionProgrammes Additional op TionsLoad recognition SequenceExplanations WoolTop-up rinse programmable Starch Drain40C Final spin Graduated rinsingProgrammes Important other care symbols Tumble dryIroning Pre-wash Additional optionsSoak ShortWater plus SpinTo check if programme locking is switched on Switching on programme lockingSwitching off programme locking early Electronic programme lockingProgrammable functions Maximum water levelSelecting the programmable function Water plus systemOption Turn to nextSelecting the Options Activating the i compartment Silk 30 C ActivatingSoak time Woollens ColdSelecting a different Soak time Gentle action Mixed Wash 40 C ActivatingStoring the programmable function in memory Top-up rinse for Cottons Starch ActivatingMemory function Activating the programmable func- tionCleaning and care Cleaning the washing machineCloth Cleaning the detergent dispenser drawer Extra cleaningCleaning the fluff drain filter and pump Place a dish under the drain spoutAfter cleaning Cleaning the filter in the water inlet Problem solving guide What to do, if Cause RemedyTor flashes and the laundry Check inlet indicaProgramme but Was not washed One of the following indiIndicator lights Rinse hold Indicator lightIndicator light Fin Drain/Final spin flashesLaundry has not been Machine shakes durIng the spin cycle Spun satisfactorilyFabric conditioner is not Large residues of deterDrawer Completely dispensed or tooOpening the lid in the event of a power failure Switch off the washing machineTo check water pressure Appliance guarantee After sales serviceProgramme update function PC Customer contactLevelling and adjusting InstallationInstallation surface Please note the following pointsRemoving the transit fitting Re-fitting the transit fittingConnection to water supply Connection to the drainage system Drain hose connectionElectrical connection U.K Non-rewireable plugs BS Consumption data Programme Load Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00