Miele W 149 Starch Drain, 40C Final spin, Top-up rinse programmable, Graduated rinsing

Page 27

Programmes

QUICK WASH	Starch	Drain/	Separate rinse	MIXED WASH1)
40°C		Final spin		high cotton	high polyester
				content	content
-	-	-	-	optional	optional
-	ß	-	-	optional	optional
ß	-	-	-	ß	ß
-	-	-	-	-	-

-	-	-	-	-	ß
2	-	-	2	3 or 42)	3
2	-	-	-	2	2
-	-	-	-	2	2
max. 500	-	-	-	max. 900	max. 500
max. 1200	max. 1200	max. 1200	max. 1200	max. 900	max. 900
optional	optional	-	optional	optional	optional
optional	optional	-	optional	optional	optional
normal	normal	-	gentle action	normal	normal

low	low	-		low	low
medium	-	-	high	low	medium

Top-up rinse (programmable):

At the end of the main wash additional water flows into the drum, and the suds are cooled slightly. Hot water might damage plastic drain pipes.

Graduated rinsing:

The suds are cooled at the end of the wash cycle by water flowing in and being pumped away at inter- vals thereby minimising crease formation.

Rinse and interim spin:

There is a spin between the rinses.

Final spin:

The maximum spin speed according to the programme can be selected with the Spin button. In the programmes MINIMUM IRON, DELICATES, WOOLLENS, Separate rinse and MIXED WASH, the spin speed is automatically limited to the maximum spin speed given above.

27

Image 27

Contents Operating instructions for Washing machine W Caring for our environment Disposal of the packing materialDisposal of your old appliance Contents Contents Consumption data Technical data General view Guide to the machineOverview Control panelCorrect usage Technical safetyUse Disposal of your old machine AccessoriesWashing environmentally and economically Before using for the first time How to wash correctly Brief guideBefore washing ASort the laundry Maximum load weights DOpen the drumLoad the drum EClose the drum KTurn the programme selector to the programme required GPull out the detergent dispenser drawer HAdd detergentLSelect any additional option re- quired MSelect a spin speedNPress the Start button SClose the inner lid and the ma- chine outer lid After washingAt the end of a programme RClose the drumGeneral exceptions Adding or removing laundry after programme startSkipping a programme stage ProgrammeInterruption AlterationToo little has the following results Adding detergentIt is important to dispense the correct amount, because Water HardnessFabric conditioners, texturisers, liquid starch Adding detergent Water softenersDo not exceed the maximum level mark Adding fabric conditioner or texturiser separatelyStarching separately Programme selection ProgrammesAdditional op Tions ProgrammesWool SequenceExplanations Load recognitionGraduated rinsing Starch Drain40C Final spin Top-up rinse programmableProgrammes Important other care symbols Tumble dryIroning Short Additional optionsSoak Pre-washSpin Water plusElectronic programme locking Switching on programme lockingSwitching off programme locking early To check if programme locking is switched onMaximum water level Programmable functionsTurn to next Water plus systemOption Selecting the programmable functionSelecting the Options Silk 30 C Activating Activating the i compartmentSoak time Woollens ColdSelecting a different Soak time Gentle action Mixed Wash 40 C ActivatingStoring the programmable function in memory Starch Activating Top-up rinse for CottonsActivating the programmable func- tion Memory functionCleaning and care Cleaning the washing machineCloth Extra cleaning Cleaning the detergent dispenser drawerPlace a dish under the drain spout Cleaning the fluff drain filter and pumpAfter cleaning Cleaning the filter in the water inlet What to do, if Cause Remedy Problem solving guideWas not washed One of the following indi Check inlet indicaProgramme but Tor flashes and the laundryDrain/Final spin flashes Indicator lightIndicator light Fin Indicator lights Rinse holdSpun satisfactorily Machine shakes durIng the spin cycle Laundry has not beenCompletely dispensed or too Large residues of deterDrawer Fabric conditioner is notOpening the lid in the event of a power failure Switch off the washing machineTo check water pressure Customer contact After sales serviceProgramme update function PC Appliance guaranteePlease note the following points InstallationInstallation surface Levelling and adjustingRe-fitting the transit fitting Removing the transit fittingConnection to water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BS Programme Load Consumption data Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00