Miele W 149 operating instructions Do not exceed the maximum level mark, Starching separately

Page 23

Adding detergent

Automatic dispensing of fabric conditioners, texturisers or starch to laundry at the end of a programme

^Add the fabric conditioner, texturiser or liquid starch to compartment p.

Do not exceed the maximum level mark.

^Push the dispenser drawer back in.

The conditioner, texturiser or starch is automatically dispensed in the final rinse. At the end of the programme a small amount of water remains in the fabric conditioner compartment p.

If starching frequently, clean the dis- penser drawer and especially the si- phon tube and fabric conditioner channel. (See section on the deter- gent dispenser drawer in "Cleaning and Care"). Do not add starch for- mulations or viscous liquid starch to the p compartment as it will clog it up. See "Starching separately".

Adding fabric conditioner or texturiser separately

^Add fabric conditioner or texturiser to compartment p.

^Turn the programme selector to "Starch".

^Select a spin speed.

^Press the "START" button.

Starching separately

^Measure and prepare starch in ac- cordance with the manufacturer’s in- structions.

^Add the starch to compartment i.

^Turn the programme selector to "Starch".

^Select a spin speed.

^Press the "START" button.

23

Image 23
Contents Operating instructions for Washing machine W Disposal of your old appliance Caring for our environmentDisposal of the packing material Contents Contents Consumption data Technical data General view Guide to the machineOverview Control panelCorrect usage Technical safetyUse Disposal of your old machine AccessoriesWashing environmentally and economically Before using for the first time Before washing ASort the laundry How to wash correctlyBrief guide Load the drum Maximum load weightsDOpen the drum EClose the drum KTurn the programme selector to the programme required GPull out the detergent dispenser drawer HAdd detergentNPress the Start button LSelect any additional option re- quiredMSelect a spin speed SClose the inner lid and the ma- chine outer lid After washingAt the end of a programme RClose the drumGeneral exceptions Adding or removing laundry after programme startSkipping a programme stage ProgrammeInterruption AlterationToo little has the following results Adding detergentIt is important to dispense the correct amount, because Water HardnessFabric conditioners, texturisers, liquid starch Adding detergent Water softenersStarching separately Do not exceed the maximum level markAdding fabric conditioner or texturiser separately Programme selection ProgrammesAdditional op Tions ProgrammesWool SequenceExplanations Load recognitionGraduated rinsing Starch Drain40C Final spin Top-up rinse programmableProgrammes Ironing Important other care symbolsTumble dry Short Additional optionsSoak Pre-washSpin Water plusElectronic programme locking Switching on programme lockingSwitching off programme locking early To check if programme locking is switched onMaximum water level Programmable functionsTurn to next Water plus systemOption Selecting the programmable functionSelecting the Options Silk 30 C Activating Activating the i compartmentSelecting a different Soak time Soak timeWoollens Cold Storing the programmable function in memory Gentle actionMixed Wash 40 C Activating Starch Activating Top-up rinse for CottonsActivating the programmable func- tion Memory functionCloth Cleaning and careCleaning the washing machine Extra cleaning Cleaning the detergent dispenser drawerPlace a dish under the drain spout Cleaning the fluff drain filter and pumpAfter cleaning Cleaning the filter in the water inlet What to do, if Cause Remedy Problem solving guideWas not washed One of the following indi Check inlet indicaProgramme but Tor flashes and the laundryDrain/Final spin flashes Indicator lightIndicator light Fin Indicator lights Rinse holdSpun satisfactorily Machine shakes durIng the spin cycle Laundry has not beenCompletely dispensed or too Large residues of deterDrawer Fabric conditioner is notTo check water pressure Opening the lid in the event of a power failureSwitch off the washing machine Customer contact After sales serviceProgramme update function PC Appliance guaranteePlease note the following points InstallationInstallation surface Levelling and adjustingRe-fitting the transit fitting Removing the transit fittingConnection to water supply Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BS Programme Load Consumption data Consumption dataTechnical data Page Page Page Alteration rights reserved/4602/V00