Miele G 7824, G 7823 operating instructions Reactivating the water softener

Page 16

Water softener softener (Optional)

Reactivating the water softener

Please only use special coarse grained reactivation salt with granules of approx. 1-4 mm. Do not use other types of salt, e.g. table salt, agricultural or gritting salt. These could contain components which are insoluble in water which could result in damage to the water softener. If in doubt consult the Miele Professional Department.

The salt container holds approx. 2 kg of salt.

If only fine grained reactivation salt is available please consult the MIELE Professional Sales office for advice.

Salt with granules ￿ 4 mm must not be used in this machine.

￿Inadvertently filling the salt reservoir with cleaning agent can cause serious damage to the water softener and damage the filter insert, and cause pressure to build-up in the salt container. To avoid the risk of injury please exercise caution when removing the salt container as there may be irritant alkaline solutions present.

Before filling the salt container make sure that you have picked up the right packet of reactivation salt.

16

Image 16
Contents Washer-disinfector G 7823 / G Contents Contents Correct application Page Page Using accessories Symbols on the appliance Disposing of your old machineIntended Use Examples of application areasUnclean side Guide to the machineGuide to the machine Clean side G 7824 only Controls DisplayDoor switch Start button Service interface Programme selectorCursor button right Moves the cursor to the right Minus buttonWater softener softener Optional Setting the water softenerReactivation display Reactivating the water softener Water softener softener Optional Run the reactivation programme ThenAutomatic mobile unit recognition Optional Mobile unit coding Setting mobile unit coding Mobile unit coding stripSet the programme place coding Protein test Areas of applicationAt the end of each programme Preparing the load Loading the machineUnloading instruments Surgical instruments OP Ophthalmology Anaesthetic instruments AN Loading in an E Baby bottles BCBottom level with 3 x E Frame Operating theatre shoes OS Transfer trolley for loading and unloading the machine Areas of application General notes Problem How to resolve it Chemical processes and technologyChemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Dispensing liquid chemical agents Additional optional DOS modulesOxivario kit Orthovario kitPreparing the DOS dispensers Fill the containers with the relevant agentDispensing liquid chemical agents Dispensing system maintenance Venting the dispensing systemExternal Dispensing systems Every 12-18 monthsOperation Operating levels Selecting or changing your own codeFixed programme Starting a programmeFree programme selection Programme sequence AWK Automatic mobile unit recognitionCancelling a programme Switching offOperating levels B or D Interrupting a programme Data transfer Maintenance Periodic checksProcess validation Routine checksCleaning the filters in the wash cabinet Cleaning the coarse filterCleaning the coarse, flat and micro-fine filters Cleaning the spray arms Cleaning the control panel Cleaning the front of the machineCleaning the wash cabinet Cleaning the door sealsMobile units, modules and inserts Renewing the paper roll Printer optionalRenewing the colour cassette After sales service Converting the type of heating Electrical connection Plumbing Technical data Optional extras Optional extrasSpecial processes Oxivario and Orthovario Description of the machineAreas of application Connecting the H2O2 solution container Disposal of your old machine Page 0366