Miele G 7823, G 7824 operating instructions Chemical processes and technology

Page 37

Chemical processes and technology

Reaction between chemical agents and soiling

Problem

How to resolve it

 

 

Natural oils and fats can be emulsified

– Where available use the "OEL“

with alkaline chemical agents. This can

programme.

lead to a heavy build-up of foam.

– This special programme dispenses

 

emulsifiers (pH neutral) in the

 

pre-rinse.

 

– Depending on application use

 

de-foaming agents that do not

 

contain silicone oils.

 

 

Soiling containing high protein levels

– Select a cleaning programme with at

such as blood can cause a heavy

least one short pre-rinse in cold

build-up of foam when processed with

water.

alkaline chemical agents.

 

 

 

Non-precious metals such aluminium,

– Please observe chemical agent

magnesium and zinc can release

manufacturer's instructions.

hydrogen when processed with very

 

acidic or alkaline chemical agents

 

(oxyhydrogen reaction).

 

 

 

37

Image 37
Contents Washer-disinfector G 7823 / G Contents Contents Correct application Page Page Using accessories Disposing of your old machine Symbols on the applianceExamples of application areas Intended UseGuide to the machine Unclean sideGuide to the machine Clean side G 7824 only Display ControlsService interface Programme selector Door switch Start buttonCursor button right Moves the cursor to the right Minus buttonWater softener softener Optional Setting the water softenerReactivation display Reactivating the water softener Water softener softener Optional Then Run the reactivation programmeAutomatic mobile unit recognition Optional Mobile unit coding Mobile unit coding strip Setting mobile unit codingSet the programme place coding Protein test Areas of applicationAt the end of each programme Preparing the load Loading the machineUnloading instruments Surgical instruments OP Ophthalmology Anaesthetic instruments AN Loading in an E Baby bottles BCBottom level with 3 x E Frame Operating theatre shoes OS Transfer trolley for loading and unloading the machine Areas of application Chemical processes and technology General notes Problem How to resolve itChemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Additional optional DOS modules Dispensing liquid chemical agentsOxivario kit Orthovario kitFill the containers with the relevant agent Preparing the DOS dispensersDispensing liquid chemical agents Venting the dispensing system Dispensing system maintenanceExternal Dispensing systems Every 12-18 monthsOperation Selecting or changing your own code Operating levelsFixed programme Starting a programmeFree programme selection AWK Automatic mobile unit recognition Programme sequenceCancelling a programme Switching offOperating levels B or D Interrupting a programme Data transfer Periodic checks MaintenanceRoutine checks Process validationCleaning the coarse filter Cleaning the filters in the wash cabinetCleaning the coarse, flat and micro-fine filters Cleaning the spray arms Cleaning the front of the machine Cleaning the control panelCleaning the wash cabinet Cleaning the door sealsMobile units, modules and inserts Renewing the paper roll Printer optionalRenewing the colour cassette After sales service Converting the type of heating Electrical connection Plumbing Technical data Optional extras Optional extrasDescription of the machine Special processes Oxivario and OrthovarioAreas of application Connecting the H2O2 solution container Disposal of your old machine Page 0366