Miele G 7823 Venting the dispensing system, Dispensing system maintenance, Every 12-18 months

Page 41

Dispensing liquid chemical agents

Venting the dispensing system

Before the washer-disinfector is first commissioned, and later on if one or more containers has been allowed to run dry, the dispensing system(s) for liquid media will need to be vented. To do this:

Press the I-0button.

Select operating level B.

Select as required: Programme DOS1-FILL Programme DOS2-FILL Programme DOS3-FILL Programme DOS4-FILL.

(See "Operation/B. Free programme selection).

Press the Start button .

The DOS-FILL Service Programmes are allocated to programme places 58-61 ex works, but can be re-allocated to other programme places, if preferred.

Dispensing system maintenance

To ensure trouble-free operation, the following regular maintenance should be carried out by a Miele approved service technician.

Every 12-18 months

Replace the hoses in the dispensing system(s).

External Dispensing systems

If external pumps are to be used for dispensing liquid agents, please inform the Miele Service Department. The instructions given in the Programming Manual under "Machine functions" will need to be observed.

41

Image 41

Contents Washer-disinfector G 7823 / G Contents Contents Correct application Page Page Using accessories Disposing of your old machine Symbols on the applianceExamples of application areas Intended UseGuide to the machine Unclean sideGuide to the machine Clean side G 7824 only Display ControlsService interface Programme selector Door switch Start buttonCursor button right Moves the cursor to the right Minus buttonReactivation display Setting the water softenerWater softener softener Optional Reactivating the water softener Water softener softener Optional Then Run the reactivation programmeAutomatic mobile unit recognition Optional Mobile unit coding Mobile unit coding strip Setting mobile unit codingSet the programme place coding At the end of each programme Areas of applicationProtein test Unloading instruments Loading the machinePreparing the load Surgical instruments OP Ophthalmology Anaesthetic instruments AN Bottom level with 3 x E Baby bottles BCLoading in an E Frame Operating theatre shoes OS Transfer trolley for loading and unloading the machine Areas of application Chemical processes and technology General notes Problem How to resolve itChemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Additional optional DOS modules Dispensing liquid chemical agentsOxivario kit Orthovario kitFill the containers with the relevant agent Preparing the DOS dispensersDispensing liquid chemical agents Venting the dispensing system Dispensing system maintenanceExternal Dispensing systems Every 12-18 monthsOperation Selecting or changing your own code Operating levelsFree programme selection Starting a programmeFixed programme AWK Automatic mobile unit recognition Programme sequenceOperating levels B or D Switching offCancelling a programme Interrupting a programme Data transfer Periodic checks MaintenanceRoutine checks Process validationCleaning the coarse filter Cleaning the filters in the wash cabinetCleaning the coarse, flat and micro-fine filters Cleaning the spray arms Cleaning the front of the machine Cleaning the control panelCleaning the wash cabinet Cleaning the door sealsMobile units, modules and inserts Renewing the colour cassette Printer optionalRenewing the paper roll After sales service Converting the type of heating Electrical connection Plumbing Technical data Optional extras Optional extrasDescription of the machine Special processes Oxivario and OrthovarioAreas of application Connecting the H2O2 solution container Disposal of your old machine Page 0366