Miele G 7823, G 7824 Programme sequence, AWK Automatic mobile unit recognition

Page 45

Operation

C. AWK – Automatic mobile unit recognition

Select operating level C.

Push the coded mobile unit into place.

Make sure that there are no small metallic objects or instrument parts attracted to the magnetic strip, in particular to the underside of it. Any metallic objects on the strip can result in the coding being incorrectly read.

Close the door.

Before starting a programme it is absolutely essential to check that the programme shown in the display is the correct on for the mobile unit being used.

Otherwise inadequate cleaning or disinfection could be the result. Please make sure, that the places assigned for the programmes using Automatic mobile unit recognition are not changed around arbitrarily.

Press the Start button .

Programme sequence

The programme will start automatically as soon as the Start button has been pressed. It is finished when PROGRAMME-END appears in the display and the background lighting flashes (press any button to switch off the flashing lights).

See "System functions" in the Programming Manual for further information on switching off the flashing signal.

Detailed information on programme sequences is given in the appendix of the Programming Manual.

The display background lighting goes out automatically after approx. 15 mins. To bring it back on again press one of the buttons.

On machines with a built-in printer you must not change the colour ribbon cartridge or the paper roll whilst a programme is in progress.

45

Image 45

Contents Washer-disinfector G 7823 / G Contents Contents Correct application Page Page Using accessories Disposing of your old machine Symbols on the applianceExamples of application areas Intended UseGuide to the machine Unclean sideGuide to the machine Clean side G 7824 only Display ControlsService interface Programme selector Door switch Start buttonCursor button right Moves the cursor to the right Minus buttonSetting the water softener Water softener softener OptionalReactivation display Reactivating the water softener Water softener softener Optional Then Run the reactivation programmeAutomatic mobile unit recognition Optional Mobile unit coding Mobile unit coding strip Setting mobile unit codingSet the programme place coding Areas of application Protein testAt the end of each programme Loading the machine Preparing the loadUnloading instruments Surgical instruments OP Ophthalmology Anaesthetic instruments AN Baby bottles BC Loading in an EBottom level with 3 x E Frame Operating theatre shoes OS Transfer trolley for loading and unloading the machine Areas of application Chemical processes and technology General notes Problem How to resolve itChemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Additional optional DOS modules Dispensing liquid chemical agentsOxivario kit Orthovario kitFill the containers with the relevant agent Preparing the DOS dispensersDispensing liquid chemical agents Venting the dispensing system Dispensing system maintenanceExternal Dispensing systems Every 12-18 monthsOperation Selecting or changing your own code Operating levelsStarting a programme Fixed programmeFree programme selection AWK Automatic mobile unit recognition Programme sequenceSwitching off Cancelling a programmeOperating levels B or D Interrupting a programme Data transfer Periodic checks MaintenanceRoutine checks Process validationCleaning the coarse filter Cleaning the filters in the wash cabinetCleaning the coarse, flat and micro-fine filters Cleaning the spray arms Cleaning the front of the machine Cleaning the control panelCleaning the wash cabinet Cleaning the door sealsMobile units, modules and inserts Printer optional Renewing the paper rollRenewing the colour cassette After sales service Converting the type of heating Electrical connection Plumbing Technical data Optional extras Optional extrasDescription of the machine Special processes Oxivario and OrthovarioAreas of application Connecting the H2O2 solution container Disposal of your old machine Page 0366