Miele G 7824, G 7823 operating instructions Set the programme place coding

Page 22

Automatic mobile unit recognition (Optional)

Set the programme place coding.

Put the magnetic strip back in the track.

The magnetic strip must be placed in the track such that the Bit coding set out in the chart is visible through the round windows in the track.

Place the track in the holder in the mobile unit and screw firmly in place.

Bit 6 (WAK) is not a component part of the modifiable magnetic strip. Make sure that you code mobile units with side connection with a track where Bit 6 is set to I.

Mobile units without side coupling must be coded with a track without Bit 6.

The magnetic strips on G 7823 /

G 7824 / G 7825 / G 7826 must have grey magnets.

The magnetic strips on G 7827 / G 7828 must have black magnets.

22

Image 22

Contents Washer-disinfector G 7823 / G Contents Contents Correct application Page Page Using accessories Symbols on the appliance Disposing of your old machineIntended Use Examples of application areasUnclean side Guide to the machineGuide to the machine Clean side G 7824 only Controls DisplayCursor button right Moves the cursor to the right Door switch Start buttonService interface Programme selector Minus buttonWater softener softener Optional Setting the water softenerReactivation display Reactivating the water softener Water softener softener Optional Run the reactivation programme ThenAutomatic mobile unit recognition Optional Mobile unit coding Setting mobile unit coding Mobile unit coding stripSet the programme place coding Protein test Areas of applicationAt the end of each programme Preparing the load Loading the machineUnloading instruments Surgical instruments OP Ophthalmology Anaesthetic instruments AN Loading in an E Baby bottles BCBottom level with 3 x E Frame Operating theatre shoes OS Transfer trolley for loading and unloading the machine Areas of application General notes Problem How to resolve it Chemical processes and technologyChemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Oxivario kit Dispensing liquid chemical agentsAdditional optional DOS modules Orthovario kitPreparing the DOS dispensers Fill the containers with the relevant agentDispensing liquid chemical agents External Dispensing systems Dispensing system maintenanceVenting the dispensing system Every 12-18 monthsOperation Operating levels Selecting or changing your own codeFixed programme Starting a programmeFree programme selection Programme sequence AWK Automatic mobile unit recognitionCancelling a programme Switching offOperating levels B or D Interrupting a programme Data transfer Maintenance Periodic checksProcess validation Routine checksCleaning the filters in the wash cabinet Cleaning the coarse filterCleaning the coarse, flat and micro-fine filters Cleaning the spray arms Cleaning the wash cabinet Cleaning the control panelCleaning the front of the machine Cleaning the door sealsMobile units, modules and inserts Renewing the paper roll Printer optionalRenewing the colour cassette After sales service Converting the type of heating Electrical connection Plumbing Technical data Optional extras Optional extrasSpecial processes Oxivario and Orthovario Description of the machineAreas of application Connecting the H2O2 solution container Disposal of your old machine Page 0366