Miele G 7823, G 7824 operating instructions Operating levels, Selecting or changing your own code

Page 43

Operation

Operating levels

There are four operating levels available on this machine:

A = Fixed and free access programmes

B = Free programme selection

C = AWK – Automatic mobile unit recognition (programme selection via mobile unit coding) - optional -

D = Programming / free programme selection / change code

(see Programming Manual)

To change operating level:

Press and at the same time. Operating levels A B C D are shown in the display.

Select the operating level you want using the or buttons.

Press to confirm selection.

Enter code when requested by the display.

The code is set ex-works to 0000<.

To enter the code:

–Press the start button , [0000] will appear.

–Enter numbers using the and

buttons.

–Select number position with the

or button.

–To confirm code press .

If you enter the wrong code: FALSE CODE, ENTER AGAIN will appear in the display.

Close the door.

Selecting or changing your own code

The factory default code can be changed. See "System functions" in the Programming Manual.

Code 1 for levels ABC Code 2 for levels ABCD

43

Image 43

Contents Washer-disinfector G 7823 / G Contents Contents Correct application Page Page Using accessories Disposing of your old machine Symbols on the applianceExamples of application areas Intended UseGuide to the machine Unclean sideGuide to the machine Clean side G 7824 only Display ControlsMinus button Door switch Start buttonService interface Programme selector Cursor button right Moves the cursor to the rightWater softener softener Optional Setting the water softenerReactivation display Reactivating the water softener Water softener softener Optional Then Run the reactivation programmeAutomatic mobile unit recognition Optional Mobile unit coding Mobile unit coding strip Setting mobile unit codingSet the programme place coding Protein test Areas of applicationAt the end of each programme Preparing the load Loading the machineUnloading instruments Surgical instruments OP Ophthalmology Anaesthetic instruments AN Loading in an E Baby bottles BCBottom level with 3 x E Frame Operating theatre shoes OS Transfer trolley for loading and unloading the machine Areas of application Chemical processes and technology General notes Problem How to resolve itChemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Orthovario kit Dispensing liquid chemical agentsAdditional optional DOS modules Oxivario kitFill the containers with the relevant agent Preparing the DOS dispensersDispensing liquid chemical agents Every 12-18 months Dispensing system maintenanceVenting the dispensing system External Dispensing systemsOperation Selecting or changing your own code Operating levelsFixed programme Starting a programmeFree programme selection AWK Automatic mobile unit recognition Programme sequenceCancelling a programme Switching offOperating levels B or D Interrupting a programme Data transfer Periodic checks MaintenanceRoutine checks Process validationCleaning the coarse filter Cleaning the filters in the wash cabinetCleaning the coarse, flat and micro-fine filters Cleaning the spray arms Cleaning the door seals Cleaning the control panelCleaning the front of the machine Cleaning the wash cabinetMobile units, modules and inserts Renewing the paper roll Printer optionalRenewing the colour cassette After sales service Converting the type of heating Electrical connection Plumbing Technical data Optional extras Optional extrasDescription of the machine Special processes Oxivario and OrthovarioAreas of application Connecting the H2O2 solution container Disposal of your old machine Page 0366