Miele G 7824, G 7823 Switching off, Cancelling a programme, Operating levels B or D

Page 46

Operation

Switching off

Press and release the I-0button.

Turn off the stopcocks.

Cancelling a programme

A programme can only be cancelled in operating level B or D.

When testing to EN ISO 15883-1 or HTM 2030 standards, the programme must not be interrupted or cancelled.

In operating levels B or D

Press the Stop button .

The programme is interrupted. CANCEL or CONTINUE< will appear in the display.

With established decontamination programmes any contaminated water must be decontaminated using a disinfecting agent before it is discharged into the sewerage system . The door on the unclean side of the machine can be opened to do this.

Use cursor to select CANCEL<, the < cursors will start flashing.

Press the Start button . The programme is cancelled and the water pumped away.

DRAIN WATER appears in the display.

After the water has been pumped away the required programme can be selected and started again.

46

Image 46

Contents Washer-disinfector G 7823 / G Contents Contents Correct application Page Page Using accessories Symbols on the appliance Disposing of your old machineIntended Use Examples of application areasUnclean side Guide to the machineGuide to the machine Clean side G 7824 only Controls DisplayCursor button right Moves the cursor to the right Door switch Start buttonService interface Programme selector Minus buttonWater softener softener Optional Setting the water softenerReactivation display Reactivating the water softener Water softener softener Optional Run the reactivation programme ThenAutomatic mobile unit recognition Optional Mobile unit coding Setting mobile unit coding Mobile unit coding stripSet the programme place coding Protein test Areas of applicationAt the end of each programme Preparing the load Loading the machineUnloading instruments Surgical instruments OP Ophthalmology Anaesthetic instruments AN Loading in an E Baby bottles BCBottom level with 3 x E Frame Operating theatre shoes OS Transfer trolley for loading and unloading the machine Areas of application General notes Problem How to resolve it Chemical processes and technologyChemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Oxivario kit Dispensing liquid chemical agentsAdditional optional DOS modules Orthovario kitPreparing the DOS dispensers Fill the containers with the relevant agentDispensing liquid chemical agents External Dispensing systems Dispensing system maintenanceVenting the dispensing system Every 12-18 monthsOperation Operating levels Selecting or changing your own codeFixed programme Starting a programmeFree programme selection Programme sequence AWK Automatic mobile unit recognitionCancelling a programme Switching offOperating levels B or D Interrupting a programme Data transfer Maintenance Periodic checksProcess validation Routine checksCleaning the filters in the wash cabinet Cleaning the coarse filterCleaning the coarse, flat and micro-fine filters Cleaning the spray arms Cleaning the wash cabinet Cleaning the control panelCleaning the front of the machine Cleaning the door sealsMobile units, modules and inserts Renewing the paper roll Printer optionalRenewing the colour cassette After sales service Converting the type of heating Electrical connection Plumbing Technical data Optional extras Optional extrasSpecial processes Oxivario and Orthovario Description of the machineAreas of application Connecting the H2O2 solution container Disposal of your old machine Page 0366