Miele G 7824, G 7823 operating instructions Data transfer

Data transfer

Each machine is supplied with a 5 m long interface cable for data transfer between the Profitronic system and an external report printer or PC.

The interface cable is rolled up inside the machine and must only be connected by an authorised Service Dealer or the Miele Service Dept.

The serial interface is RS 232 compatible.

For the interface configurations see "PC/Printer Function" in the Programming manual.

Various printers can be used as external printers:

–Epson-compatible

(contact Miele for a list of suitable models).

–HP Laserjet.

Pin configuration in the 9-pole sub-D connector on the interface cable:

5GND (base)

3 TXD (transmit)

2 RXD (receive)

1-4-6 (linked)

7-8 (linked)

A standard null-modem or laplink cable can be connected.

The extension cable to the printer/PC must not exceed 10 m in length.

Please note the following when connecting a printer or PC:

–Only use an industry-standard PC or printer (e.g. in Germany TÜV, or VDE approved).

–The size of the printer or PC must be taken into account when installing the machine.

The report printer settings are described in detail in the Programming manual under "PC/Printer function".

48