Miele G 7823, G 7824 operating instructions Interrupting a programme

Page 47

Operation

Interrupting a programme

A programme can only be interrupted in operating level B or D.

If you absolutely have to open the door, e.g. because the load is obviously unstable (conscious intervention):

After interrupting a DESIN disinfection programme, if you wish to continue it please check the message in the display at the end of the programme. If the message

PROCESS PARAMETERS NOT MET is displayed, it means the door was opened after the disinfection part of the programme and the DESIN parameters were not fulfilled. If necessary the programme must be repeated.

In operating levels B or D

Press the Stop button .

The programme is interrupted. CANCEL or CONTINUE< will appear in the display.

Open the door.

On barrier machines please note: If the machine is set to WITHOUT DOOR INTERLOCK - YES the doors on either the clean or unclean side can be opened. If it is set to WITHOUT DOOR INTERLOCK - NO only the door on the unclean side can be opened at this stage.

Washer-disinfectors used as medical devices (in accordance with EN ISO 15883) should always be set to WITHOUT DOOR INTERLOCK NO.

Caution. Water and items in the machine may be hot. Danger of burning or scalding.

Where a chemical disinfection programme has been used, be aware that steam may contain high quantites of disinfecting agent.

Rearrange the load. Follow infection control regulations and wear protective gloves.

Close the door.

Press the Start button .

The programme will continue.

47

Image 47

Contents Washer-disinfector G 7823 / G Contents Contents Correct application Page Page Using accessories Disposing of your old machine Symbols on the applianceExamples of application areas Intended UseGuide to the machine Unclean sideGuide to the machine Clean side G 7824 only Display ControlsMinus button Door switch Start buttonService interface Programme selector Cursor button right Moves the cursor to the rightReactivation display Setting the water softenerWater softener softener Optional Reactivating the water softener Water softener softener Optional Then Run the reactivation programmeAutomatic mobile unit recognition Optional Mobile unit coding Mobile unit coding strip Setting mobile unit codingSet the programme place coding At the end of each programme Areas of applicationProtein test Unloading instruments Loading the machinePreparing the load Surgical instruments OP Ophthalmology Anaesthetic instruments AN Bottom level with 3 x E Baby bottles BCLoading in an E Frame Operating theatre shoes OS Transfer trolley for loading and unloading the machine Areas of application Chemical processes and technology General notes Problem How to resolve itChemical agents Problem How to resolve it Chemical processes and technology Soiling Problem How to resolve it Chemical processes and technology Orthovario kit Dispensing liquid chemical agentsAdditional optional DOS modules Oxivario kitFill the containers with the relevant agent Preparing the DOS dispensersDispensing liquid chemical agents Every 12-18 months Dispensing system maintenanceVenting the dispensing system External Dispensing systemsOperation Selecting or changing your own code Operating levelsFree programme selection Starting a programmeFixed programme AWK Automatic mobile unit recognition Programme sequenceOperating levels B or D Switching offCancelling a programme Interrupting a programme Data transfer Periodic checks MaintenanceRoutine checks Process validationCleaning the coarse filter Cleaning the filters in the wash cabinetCleaning the coarse, flat and micro-fine filters Cleaning the spray arms Cleaning the door seals Cleaning the control panelCleaning the front of the machine Cleaning the wash cabinetMobile units, modules and inserts Renewing the colour cassette Printer optionalRenewing the paper roll After sales service Converting the type of heating Electrical connection Plumbing Technical data Optional extras Optional extrasDescription of the machine Special processes Oxivario and OrthovarioAreas of application Connecting the H2O2 solution container Disposal of your old machine Page 0366